Spaceframed SR20DET RWD Nova

strange they don't come with bumpstops.

Quote:

---

Originally Posted by The Simps

I've ran all the earths individually for each component in the engine bay (they all had to be cut to move things) and they will all mount up where the old battery earth did on the bulkhead. I also changed the plug on the wiper motor for a smaller more lightweight item because i was trying to compensate for the weight gained running individual earths to everything :p

---

lol

lol I'd neg rep you ya mother if I was a member! lol

lol you love me really lol

:bullsht:

:wisewood:

that monkey rocks!! I wish they had a donkey one. I like donkeys.

Ditto.

Been looking at my switches again etc and been looking at the rear heater window relay. I'm not going to be needing it due to a polycarb rear so I traced the wire back to find it go into this relay....

http://img.photobucket.com/albums/v3...t/29-03-09.jpg


From what I can work it how it works is that it will only work the rear screen when the alternator warning light is out ie charging. I'm assuming its because its such a drain? So I thought if I take the output black wire that went to the rear screen and joined it with my overide fan wire that when I pull the rear screen switch the fan should come on but as a safety it will be switched off when engine is off. Have I got that right?

Can someone also tell me how I wire up the ignition so that you have to turn the key to ignition then press the push button to start but turning the key won't work?

Quote:

---

Originally Posted by The Simps

Can someone also tell me how I wire up the ignition so that you have to turn the key to ignition then press the push button to start but turning the key won't work?

---

Is it just a case of disconnecting the black/red starter wire from the ignition barrell and having it on a push switch that has an ignition feed?