http://www.eurorallye.co.uk/product_...roducts_id=196
thats what im thinking
Printable View
http://www.eurorallye.co.uk/product_...roducts_id=196
thats what im thinking
well i need to get the corsa and make the money. If you know anyone local after bits i'll bring them down when i collect. Fingers crossed i will have the money at the weekend.
next weekend yeah?
what colour is it mate? standard brakes? what alloys
Ill have a propper look over it tonight. Its got cav slabs in white, lowered 60-80mm all round on shocks and springs. Guessing standard breaks.
The engine runs C16xe has a manzel style powerbox and a complete stainless system with a 4 branch manifold.
Interior is pretty much stripped but has to shaged calibra leather seats in the front.
Exterior as said gsi kit complete and morrettes. Hoping i can sell enough off it to justify keeping the wheels and engine lol
if all goes well next weekend yes mate. Will take the drive down and have a nosey at the nova lol
ah, was going to ask how much u want for the wheels lol
well i may have to shift them to get the money together lol. We will wait and see.
At least i know your interested in them thou :)
yeh mate wants a set for his, hes in no rush for wheels at the minute though lol
nice mate will look beter with the bonnet matching the car!!
oooh shiny shiny!
Cheers matt(game1)
http://i221.photobucket.com/albums/d...00508-1028.jpg
http://i221.photobucket.com/albums/d...00508-1028.jpg
shall try and get it fitted this weekend :D
That inlet looks top draw
Cheers edd.
Want to leave work and go get it fitted lol
Can the standard inlet come off with engine in situ anyone?
yeah mate you can do it with the engine in.took me about 20 mins to do it
Cheers tony, will give it a go asap
do you have a spare fuel rail blanking thingy laying about?
managed to just fit my blackberry inside the inlet to get a picture lol
http://i221.photobucket.com/albums/d...00508-1416.jpg
:D :D :D
Nova looks spot on mate. Yellow bonnet will look better imo!
Youve got the IC fitting well considering how big it is! lol
sorry mate aint got one laying around.ask novarick on mig.he might have one laying around.nice inlet mate.who did u get that off or did u get it made
tony you plonker lol it was the one rick made for me that I had polished :thumb:Quote:
Originally Posted by tony k
Fitted it yet Shaun :confused:
oops my bad lol,get it fitted shaun:thumb:Quote:
Originally Posted by game1
right, went to bournemouth yesterday. leaving 6.30 to meet novarally(colin) to get a complete c20xe for a mate :)
got back and set to stripping my old inlet off and start to fit the new one, here is a few pictures:
http://i221.photobucket.com/albums/d...00509-1817.jpg
http://i221.photobucket.com/albums/d...00509-1818.jpg
Yes i know the grommet is missing from the power cable, just need to refit one. all is on fine, but just a few problems when it comes to the V6 throttle body. there are 4 vacuum outlets on the V6 but only 3 on the turbo one.
anyone got any pics of theres connected?
also on the tophat i had a dumpvalve take off, will i have to make one into my boost pipe? and also where does the idle control valve now connect to?
Shaun
Ok..
put a deposit on another shell last night, hobbits blue van :)
nice to meet you aswel fella.
recieved a fuel blanking plate and some braided fuel line in the post this morning. get them all fitted tonight
good on ya mate,another shell ay,get that inlet plumbed up lol
lol its for a mate that we got a c20xe for on sunday :)
trying to find out how the vacuum pipes go lol
Oh thoughtit was for you lol,what vacuum bit you going on about,if its for the brakes its underneath,its a nut thats been welded onQuote:
Originally Posted by corsagsi16vplym
na on the throttle body mate, theres 4 vacuum outlets :S
noo this yellow shell is sweet :)
Thats what im stuck on,yeah i know that shell is clean wish i just bought the whole car now lolQuote:
Originally Posted by corsagsi16vplym
mmmmmm new wheels:
http://i221.photobucket.com/albums/d...00512-1104.jpg
just arrived! my 5 stud hubs are being machined as i write, and i will be fitting the rears tonight aswel :D
Ooooo cracking on with the 5 stud then already. :thumb:
yeh mate no point hanging about :D
dont muck about do you shaun,wheels look clean,what you doing with your old set
there for sale on here mate.
probably do these wheels black i think...
Oh right will have a lookie,doing them black,a shiney black,or matt black,keep up the good work mateQuote:
Originally Posted by corsagsi16vplym
matt mate, they prov sold though
thought u breaking yours..?
Mines on hold for now,my mate wants a set of wheels for his corsaQuote:
Originally Posted by corsagsi16vplym
loving teh new wheels bud!!
fitted one of the rear hubs last night, didnt have time for the other.
who runs vectra rear hubs? can i keep the vectra disc or do I have to use a cav v6 one??? any gen?
rubbed back all the wheels, masked the edges and gave some primer, rubbed back and then some colour. not finished but havent come out too bad.
5 stud front hubs will be back from machine shop this afternoon and will crack on with them tonight :)
http://i221.photobucket.com/albums/d...00512-2332.jpg
oh and yes there in dire need of some tyre shine lol
Not as bad as your trainers need some whitener!! lol
How much are the fr hubs machined by?
lol craig!
they were new etnies a few weeks ago :(
ahwel lol, excuse to buy another pair
im not too sure fella, will look tonight when i fit them
new shafts are here, wheels painted! will all be fitted tonight with more pics!
get pics up mate but the wheels look good in black aswell!!