-
had another play on my own today! got the timing bang on after the timing gun was matched to the ign mean value on the lap top!, imo it is idling as good as it did on motronic!http://www.migweb.co.uk/forums/images/smilies/eek.gif on the down side my stat housing is leaking like a mofo!! at first when i looked underneith the car i thought it was the water pumphttp://www.migweb.co.uk/forums/images/smilies/eek.gif all in all pritty good, abit smokey but it smells of fuel so i guess its because its on the rough map? and it doesnt like to rev much, starts poping and banging!
-
God dam your still playing with your self...i mean by your self with that car..
Fair play mate,ive been on nl for 3yrs and dont think i have seen that car move(apart from being pushed in and out the garrage) lol
Dose look like it's getting there now though mate,so keep going.
My mate mike his 1600 8vT pops and bangs on his DTA when you take it over 4krpm due to it not getting set up properly,as for mine...ha ha,well thats sat on the drive from when the AA towed me home in may...lol
Scott
-
should have some more updates and pictures soon! been mounting my spa gauge sensors! also need the threaded metal part that joins the 2 hand brake cables together by the rear beam [compensating yoke?] any one got one?:)
-
-
finaly got power back in the garage tonight!http://www.migweb.co.uk/forums/images/smilies/smile.gif also got bored and ordered the parts to mate my turbo to the air filter, used air duct hose and 2 silicone hoses! using the std hose was doing my head in as it was just a realy bad fit!, also ordered some black manifold heat wrap and ties! and went and bought all new ball joints the other dayhttp://www.migweb.co.uk/forums/images/smilies/smile.gif spa's are all tap'ed in place just got 3 ball joints to go, 2 allen bolts in the rear beam, make handbrake cable up, got all the cables now, then do a final bolt checkhttp://www.migweb.co.uk/forums/images/smilies/lmao.gif
-
LMAO final bolt check will result in another rebuild.
-
if i put any bolts in that is Benlol
-
small update, decided i did not like my cam and belt cover any more! so i have just done the belt cover in that vht wrinkle paint! its in the oven at the moment! looks awsome! bird is going to go mad though as the oven stinks! lucky im on nights tonight so wont see her!lmao
if it all goes well ill do the cam cover and top hat, then do the header matt black aswell as the boost pipe! going for the industrial look!
still waiting for 2 bronze bushes to be made for my linkage, once that is done the car can come off the jack and i can do the hand brake cable! then its off to Mark for some map tweeking:)
-
i fancy that VHT paint on mine,,,,,,
-
will get some pics up soon Rick, my digi cam has broken though so will try and get a mate to take some!,
vht paint looks awasome mate! ive now done the cam cover/ belt cover/ dizzy housing and top hat, the boost pipe and header tank have gone matt black!:thumb:
