Yeah that's him. You guys were sound. :)Quote:
Originally Posted by Jeff16v
Its looking well, try turning the damping up a tad on the fr to reduce the bouncing.
Printable View
Yeah that's him. You guys were sound. :)Quote:
Originally Posted by Jeff16v
Its looking well, try turning the damping up a tad on the fr to reduce the bouncing.
depends if the bouncing is up/down like a free spring or just where it's following the road, apparently I used to "bounce" in my old red one as I drove along purely because it was sat on stiff springs lol
You should show at billing Jeff! Even if its only the sunday... try get there early and give the car a once over then enjoy the day. :)
Nick.
Quote:
Originally Posted by Jeff16v
Bring the family in the Nova so i can have a good look around it..
Little update, picked up some bits at billing and fitted and worked on the rear disc conversion.
Um concentrating in the bay still after poking my nose around and benne at pvs, the chrome pipes are actually off a vacumn cleaner that I found in a skiplol
http://i233.photobucket.com/albums/e...f/d1825848.jpg
new header also
http://i233.photobucket.com/albums/e...f/e248ef23.jpg
rear beam bits, brakes were rusty as hell that Will F got for me, much nicer now. Beam powdercoated but I will have to use the anti roll bar of my old beam.
http://i233.photobucket.com/albums/e...f/87f2ee72.jpg
Nice nice, can i say one thing i'd do? Get the extra small inlet welded on to the header tank around the back. Then you can route the inlet water warmer pipe to it and have it tucked neatly out the way.
the little water pipes are the next bits to get sorted, I was trying to work out how the hell to get it to the header in a pretty way, nice idea Benn. Will look into it once I've sorted some new silicone ones. Btw- where can I get lenghts of silicone without buying kits?Quote:
Originally Posted by Benn
Ebay dude, its where i buy all of mine.
This one does lots. Used him a few times,
http://stores.ebay.co.uk/Auto-Perfor...e-Hoses?_rdc=1
If you run the water pipe under almost under the washer bottle.
cheers Benn, meant to say, have you used someone in particular that had a good choice and good service:thumb:Quote:
Originally Posted by Benn
I've used this one and the guy that sells all the TXmotorsport stuff (JBI)
Both some silicone, as most of my hoses are custom shape. Both are good, auto-perf are a lil slow on posting i found, but ok bar that.
Both do a nice high gloss black.