Up. Load more stuff going via eBay this weekend inc Sealey engine crane, low entry high lift 2.5tonne trolly jack, Comp TH's, RFX's & Corsa GSi kit etc.
Printable View
Up. Load more stuff going via eBay this weekend inc Sealey engine crane, low entry high lift 2.5tonne trolly jack, Comp TH's, RFX's & Corsa GSi kit etc.
up
Still got gsi arches all clips intact let me no
PM sent re seat mounts 2 days ago but no reply...
Rolling shell will be on eBay mid next week when Im back from my holidays with everything highlighted in red included in the asking price (parts alone total £1346.50, all still fitted to car).
Car is currently SORN until Feb 2013. 1999 T reg, 67k miles, 5 former keepers, HPi clear. Has welded in seat rails, welded in harness eyelets, welded in rear brace, lots of carbon blanking panels in dash/floorpan/bulkhead etc, engine bay stitch welding done, all unused bracketry removed, lightweight motorsport wiring looms fitted, dash/centre console fitted, internal copper brake lines through out with hydraulic handbrake fitted, all glass & bodypanels fitted, plates/V5C/Vin tags all present & correct. Fuel tank, OEM lines & pump fitted (tank is half full of high octane unleaded @ 3 months old aswell) Will be supplied rolling on standard front suspension & brand new billys on rear. No steering wheel though.
Sensible offers ITRO of £1000. (which is a relative bargin considering how many hours prep work its had). Im in no rush to sell & could easily continue braking this & selling all the other associated parts which total a hell of a lot more then £1k asking price.
Up. Seat mounts now on eBay BTW.
Mike are you taking the flexi brake pipes off dude?
Yes mate.Quote:
Originally Posted by scott.parker
Mike does the C20XE head have the lifters in? Are they good or havent you got a clue? lol :thumb:
Yes has lifters, dont know how good they are though.Quote:
Originally Posted by xXx_Nova_xXx
Quote:
Originally Posted by Mike
Well can i have the feckers then! lol
Will also have these for sale very soon....
Astra Coupe SE2 17's with 215/40/17's fitted. All the tyres have between 3 & 6mm of tread. All of these rims have minor kerbing around the rims, some worse then other but will get better pic once there out of storage. x4 centre caps. Fully balanced & ready to go.
http://i80.photobucket.com/albums/j181/mikenova/SE2.jpg
http://i80.photobucket.com/albums/j1...enova/SE22.jpg
Sidemounts & XE mounts now sold.
Will be boshing a load more XE engine & other parts of this on eBay through out this week.
Hi mate, Do you have all the bits needed to do a full c20xe conversion? Im not sure whats needed exactly but if you could let me know and a price it would be appreciated!!
Nope.Quote:
Originally Posted by Tiger13
Sensible offers on parts please chaps as want to buy a new car so want all this junk shifting before I buy another motor.
how you getting on with the shell mike??
Not even touched it. Still loads of parts to come off it yet when I have the time.Quote:
Originally Posted by autoworksnovasport
Offers please peoples.
Oil cooler now sold also.
Once the weather gets a bit better the rolling shell complete with everything highlighted in red (& a few other bits included but not listed) will be going on eBay starting at 99p.
Offers welcome on all parts as its all going to fund a new race car so the more monies the betterer.
RFX's now on eBay also.
metal gear linkage bar and braided lines still got these?
Still got both but brake lines are going with the car now. Gear linkage bar isnt a Rosejointed type end fitting, its the plastic ball type fitting.Quote:
Originally Posted by reecegsi
Dude i really want these brake pipes..
Scott
got an oil cooler?
Nope.Quote:
Originally Posted by reecegsi
If the weather holds tomorrow the car & quite a large spares package is going up on eBay tomorrow evening for quite a sensible Buy It Now price. Supplied as a rolling shell with everything highlighted in red in post #1 inc.
Nitrous oxide kit is now being kept & fitted to my new car though.
Gen GM Sump gasket kit now sold also.
Both XE rocker covers now sold.
Going on eBay tonight is ~
Brand new GM 20XE/LET manifold breather
Brand new XE/LET alloy alternator pully
Built up XE head (no cams)
XE T/B (used) with TPS.
XE oil pick up pipe (used)
Early XE cambelt back plate (used)
Corsa B alloy rad brackets. (used)
Alloy V pully now sold.
Listing even more parts tonight also.
what b16 engines are they mate the b16a? what price you looking for the engines? pm me thanks mike
Already sold chopper.Quote:
Originally Posted by ccm640
Head, foot tray & rear wiper motor now sold.
RFX's currently on eBay.
The rolling shell complete with everything listed below & some other bits & pieces will be avaliable very soon for not a lot of money.
Quote:
Originally Posted by Mike
Up.
hi i will take
Goodridge braided flexis with s/s fittings not the sh1tty zinc coated fittings, new 0 miles £35
can u pm payment details thanks
These are being sold with the car.Quote:
Originally Posted by gsi-xe
To answer a few qeustions....
Shell comes completely panneled & glassed, dash & centre console in place, fuel tank/lines/pump fited & recently half filled with fuel too. Standard front suspension fitted, bilstien rear with billy springs & ally adjusters, front & rear lights fitted, wiper motor/linkage etc, welded in rear brace, welded in seat rails, stitched engine bay. Obviously has steering rack (and new TRE & TCAs) all still fitted.
Also inc is:
Standard rad with some random hoses
Standard engine mount brackets
Standard engine mounts
Set of brand new locking lug nuts for studded hubs
All four hubs are studded not OEM nuts
NO exhaust system fitted at all
Has no front brakes at all what so ever
Disc braked rear axle fitted with handbrake cables fitted & bias'ed hydraulic handbrake setup fitted
There are some other minor odds & ends inc like gear linkage, rad brackets yadda yadda.
OITRO of £750 or £950 & ill chuck in a set of 15" Revoloution RFX's to boot.
Offers.
C'mon chaps, offers please, seen something I really want but not got enough room until I can shift this!!!