Guin your my hero lol
So you've decide on the front screen after all lol Have you decided on heated seats as well?
Don't over do the carbon as you'll end up a halfords castoff lol
Printable View
Guin your my hero lol
So you've decide on the front screen after all lol Have you decided on heated seats as well?
Don't over do the carbon as you'll end up a halfords castoff lol
not enough room for heated seat switches nor do i have the right seatslol
dont wory it will look good not halfords
Sorry i forgot to txt you my number, what's up?
just a few boring updates, its getting there honest
Fitted these door pin switches from a MK4 Astra, GM part yet waterproof
http://i271.photobucket.com/albums/j...1/DSC00666.jpg
Lights on Buzzer has been wired in
http://i271.photobucket.com/albums/j...1/DSC00665.jpg
as you can see i now have a front fog lamp loom(green one), but the heated screen loom is yet to go in
http://i271.photobucket.com/albums/j...1/DSC00664.jpg
Sorted out the loom for the vanity mirror sun visors, and they have been wired to only illuminate when the side lights are on
http://i271.photobucket.com/albums/j...1/DSC00667.jpg
this has been sourced from a corsa C and will be fitted in the rear of my Nova
http://i271.photobucket.com/albums/j...1/DSC00668.jpg
got this for free gratis which will be an addition for my eventual false floor
http://i271.photobucket.com/albums/j...1/DSC00669.jpg
George pig and his trike have made an appearence
http://i271.photobucket.com/albums/j...1/DSC00672.jpg
whilst all this was occuring, guin was busy treating himself
http://i271.photobucket.com/albums/j...1/DSC00654.jpg
Neat little touches dude, how comes youve wired the visors only to work with sidelights though, so they only illuminate at night?
Guins snack looks nice, i wants some lol
george pig ftw!
yes dude, you only need light when its dark so i had him wire it that wayQuote:
Originally Posted by Spudly
http://i271.photobucket.com/albums/j...1/DSC00671.jpg
http://i271.photobucket.com/albums/j...1/DSC00670.jpg
Here is proof that the Cruise control is fitted and will work, i just need to fashion a bracket for the clutch switch.
and when its all in and working correctly the heat shield/mounting cover will get chromed
other little details include
the heater control and main light switch illumination have been wired so they only come on with the side lights
and the front fog switch has also been wired to the ignition live so i can have the fogs on without any other lights, ive done this as they are actually DRL (day running lights) so i can have them on on there own just like you see on all these modern Audi's etc and the new Vaux Insignia