Coming on well mate
Printable View
Coming on well mate
whilst the engine is stripped, i suggest getting your self an air oil cooler to go with the water one aswell
helps stop the water temps going nuts on full boost lol
Baxter which cooler and take off woukd you recommend? When i looked at that Idea for mine I noticed you would need a special mounting bolt (the one that goes up the middle in to the block) if you intended to mount the oil to air cooler in the same place as the oil to water one.
nice project yourve got here, saw you at PVS doing a few runs up the strip then tried to find you to have a natter. i had a 1.7td corsa at the time and ive now got count vaux alot's old 1.7td corsavan.
nice figures you had off the dyno aswell
what i did was just use a sandwhich plate, M20 iirc, on the top of the water one, was a bitch to do, i used a 13row cooler, was sound, temp never went above 1/2 even with a 1min full throttle hammering lolQuote:
Originally Posted by Count Vaux Alot
Love this, reminds me of an Intergale.Quote:
Originally Posted by balley77vaux
/\ its a good idea - Dan what boost gauge did you use?
i wanted to do that with my dash but there ent any room for the gauge
Cheers MarkQuote:
Originally Posted by dj_wudgey
Count vaux: cheers.. I used a 30quid gauge of ebay, I think it were some thing like motorgauge?!
Baxter: I think am going to as she did get sweaty after a bit of boost!
Roperstun: Yeah I remember talking to you, cheers