Printable View
not at this time, as i dont have to. i only compete at club level on road rallys etc. i would have to get it log booked if i was going to do stage rallys, but i have no plans to do that.Quote:
Originally Posted by ashtal
steve
BTW
nice blue m8
now get flatting and buffing ;)
looks great mate
thats looking stunning mate..:thumb:
looks awsome mate
Thanks for your kind words :) . Hope to get the bonnet and doors done by the weekend.
Got my bonnet and two doors rubbed down ready for paint and im not happy with them so there back in for some more high build primer to iron out any rippes thay may have.
The bonnet was a right pain as the sealer on the inside started to come away from the frame and the skin. I have had to remove all the old sealer and replace it. the skin of the bonnet then got a bit messed up so it need some sorting out with a block.
This is the old catch mounts whic were rusty so they had to go.
http://img2.putfile.com/thumb/8/22413430434.jpg
http://img2.putfile.com/thumb/8/22413430481.jpg
Nice new bit of plate in there, much lighter to.
http://img2.putfile.com/thumb/8/22413430398.jpg
Under side of bonnet with new sealer.
http://img2.putfile.com/thumb/8/22413430352.jpg
Blocked surface.
http://img2.putfile.com/thumb/8/22413430317.jpg
Also got 6 meater so -6 an fuel pipe for ?30
http://img2.putfile.com/thumb/8/22413430652.jpg
http://img2.putfile.com/thumb/8/22413430650.jpg
Oh, i got a problem as i think the steering wheel is just to on the piss to use. This is the lower bracket on the column. Looks bent to me, any one know better !?!
http://img2.putfile.com/thumb/8/22413430660.jpg
The pic might need enlarging !
can you post a new pic of above?
the mesh part you can just see at the bottom of the pic is the bit that is designed to collapes in a crash, sometimes they get damaged when using a <cough> hammer <cough> to get the old wheel off is it straight??
steve
Bonnet and doors are now painted afetr they were re-primed. It's starting to look more and more like a car again now !
http://img2.putfile.com/thumb/8/23112145918.jpg
http://img2.putfile.com/thumb/8/23112150066.jpg
With aerocathces fitted
http://img2.putfile.com/thumb/8/23112150091.jpg
Minty mint doors
http://img2.putfile.com/thumb/8/23112150012.jpg
http://img2.putfile.com/thumb/8/23112150110.jpg