Doubt it'll be at any shows this year! Thanks all, it's not that bad when you get stuck in to it.
Printable View
Doubt it'll be at any shows this year! Thanks all, it's not that bad when you get stuck in to it.
Dude bit off topic, but what head light bulbs was it you had in the nova?
Scott
Very off topic lol I had Osram Silverstar bulbs.
Cheers dude, just remember them being very good bulbs etc.
some very good work i see there iain :) when get my nova running will nip over and have a look at some of the work :)
Some progress on the seat brackets.
3mm Spreader plates, roughly 70mm x 70mm:
http://iainel.co.uk/images/forums/NovaWIP2/233.JPG
Which will sit roughly like this:
http://iainel.co.uk/images/forums/NovaWIP2/234.JPG
http://iainel.co.uk/images/forums/NovaWIP2/235.JPG
Aiming to have the passenger seat around here:
http://iainel.co.uk/images/forums/NovaWIP2/236.JPG
http://iainel.co.uk/images/forums/NovaWIP2/237.JPG
Some room to get to the harness mounting eyebolt now:
http://iainel.co.uk/images/forums/NovaWIP2/238.JPG
Seat rails will be made from 25mm x 25mm x 3mm box section (my pole only just fits in my garage, har har):
http://iainel.co.uk/images/forums/NovaWIP2/239.JPG
Cut to roughly the right size:
http://iainel.co.uk/images/forums/NovaWIP2/240.JPG
"All this looks very heavy!" I hear you cry.
All 8 spreader plates weigh roughly 1kg:
http://iainel.co.uk/images/forums/NovaWIP2/241.JPG
And 2 seat rails weigh roughly 2kg:
http://iainel.co.uk/images/forums/NovaWIP2/242.JPG
http://iainel.co.uk/images/forums/NovaWIP2/243.JPG
So each seat rail setup will weigh approx 2.5kg. Each seat weighs approx 6.6kg. This is a combined weight of 9.1kg per side - a saving of nearly 6kg per seat over the original setup.
good lad for weighing it all
the seat is awesome.. proper suggestive
Nice one, so your old buckets/frames were around 15kg each???