Fat hands :)
Printable View
Fat hands :)
Martin, now i don't mean to be a annoying, but you might want to order some more washer pipe, as it needs to be black or none translucent, as thats the main reason why the washers/piping etc gets clogged up on old cars, as black/brown algae grows in the tank/pipes from UV exposure, thats what the manky black stuff is that normally comes out of a rear wash wipe and blocks it up on old mk1 novas, as they use clear pipes on rear wash wipes etc..
TRUST me on this one, or just check the net for it I'm sure it will be somewhere about it.
Scott
thanks browney!
and scott, thanks for the info, stupid question time, will it still be affected even though it will be under the bonnet, so little sunlight can get to it?
TBH you might as well leave it and just replace it if when it happens lol
yeh thats what i was thinking, im sure it will be years before it occurs :) (hopefully) lol
hey guys, small update, not been doing alot, have a few machining tasks in the future to do, but for the moment i have been doing the wiring for the megajolt.
start of with a plug - if you ever do this, and get a chance pick the bottom one
http://i30.photobucket.com/albums/c3...6/8891602a.jpg
one crank sensor extended
http://i30.photobucket.com/albums/c3...6/efa43483.jpg
one coil pack plug extended
http://i30.photobucket.com/albums/c3...6/58254f3f.jpg
a trip to the car and a measure, and some of this later
http://i30.photobucket.com/albums/c3...6/6ff2944b.jpg
http://i30.photobucket.com/albums/c3...6/cb62f057.jpg
and you end up with my current wiring loom
http://i30.photobucket.com/albums/c3...6/4e51b342.jpg
the missing wires are - live, earth, wires to the MJ plug and what ever comes of that plug.
for the moment, i could put a live and earth on, and the engine should run on its limp mode. i just need to sort the engine and get a trigger wheel.
Hes right your hands are fat lolQuote:
Originally Posted by djbrowney
lol it matches the rest of me.
it would look stupid if i had a skinny body.
why you soldering the wires together, i have always been told to crimp them on cars ect due to the cracking and falling apart !
dj. fook off.
solder and shrink is for men, none of this girly crimping crap..!
lol have some repQuote:
Originally Posted by bmw156
Martin has asked me nicely to post these
something called a panard rod?
http://i30.photobucket.com/albums/c3...6/76e0fd50.jpg
http://i30.photobucket.com/albums/c3...6/8a4b6cdf.jpg
http://i30.photobucket.com/albums/c3...6/f686bba3.jpg
http://i30.photobucket.com/albums/c3...6/9a5259ad.jpg
Hello guys.
not a massive amount done. i ordered some new teflon lined rose joints. for the panhard rod. as the economy ones are POO.
also bought this so i can have some fun. - ebay special at 125 delivered.
http://i30.photobucket.com/albums/c3...6/3b05a033.jpg
http://i30.photobucket.com/albums/c3...6/fafc875d.jpg
and had a measure of my wheel studs as i need some longer ones.
http://i30.photobucket.com/albums/c3...6/36ab0825.jpg
http://i30.photobucket.com/albums/c3...6/9ee6eacd.jpg
http://i30.photobucket.com/albums/c3...6/bff1a97d.jpg
for notes - pitch of 1.5mm
also ordered my trigger wheel, and they sent me the wrong size - grrrr
been doing some more wiring as well. nothing to exciting.
small update
i currently have a fooked hand. so not alot happening. just spending money lol.
got some new longer bolts for the axle - am struggling to get the old ones out lol.
got the last of my water hose through, so i can cut them to length and they are done. good times.
and also got the right size trigger wheel through.
http://i30.photobucket.com/albums/c3...6/ed042db4.jpg
have you got the link for the engine crane by any change?
ebay it you lazy bastid lol.
kellybelly, has martin got a panhard rod then???? is it useful for controlling the rear end, especially with banging coming from it & also limiting tramp..??.
lol, you sarcastic bastid.
+ rep lol
You must spread some Reputation around before giving it to mowgli again.
/\ i don't know what you mean......
ok.
this project has just been turned on its head.
in a good way.
more news saturday i think.....