i think your the only one who looks at this lolQuote:
Originally Posted by Ernie
i give up
Printable View
i think your the only one who looks at this lolQuote:
Originally Posted by Ernie
i give up
Good lad get them new goodies sorted :D
The hatchback version says hi lol
I read it :(
get them new goodies sorted?Quote:
Originally Posted by NOVABIKECARBED
im lost lol
and thanks someone else:thumb:
Shockers and exhaust ;)
How are the wheels coming along then?
Any other plans after the shockers, exhaust and alloys are put into there rightful homes.
oh lol well all depends now as i got made redundant and the missus is 3 and a half monthes preggers but im still trying to source an engine and some bucket seats 100mm springs new tyres for the alloys rear cage loads more but money is an issue so it will take a while lol
alloys are still as they were my dad lost intrest so had to get him motivated but they were put on hold for my arches today
ive got loads to do
i am thinking of finishing the bodywork and selling her up though??
thnaks for the intrest
havent done too much but have been fecking around with the ****ebag tonight and got done what i wanted for sat so it dosent look like stig of the dump
rubbed my wheels down
http://i532.photobucket.com/albums/e...ers/1004-1.jpg
then got them all sprayed up
http://i532.photobucket.com/albums/e...ers/1007-1.jpg
then i cleaned the exhaust so it isent rusty and black anymore considering its years old i thought it turnt out ok
http://i532.photobucket.com/albums/e...ers/1009-1.jpg
sprayed the front quarter upright strips/pillar strips satin black as they were rough as hell
http://i532.photobucket.com/albums/e...ers/1010-1.jpg
put all the back end back to standard i think it looks much better
http://i532.photobucket.com/albums/e...ers/1008-1.jpg
and how the car is now
http://i532.photobucket.com/albums/e...ers/1006-1.jpg
and a picture of a little ****e that i had around lol
http://i532.photobucket.com/albums/e...overs/1015.jpg
had a slight update again
sorted the front wing from this:
http://i532.photobucket.com/albums/e...vers/front.jpg
to this: (the lumpyness inside id filler where i covered the welds and not sanded it very well >> not rot lol)
http://i532.photobucket.com/albums/e...ers/frontt.jpg
and sprayed both arches now they have been welded and sanded
http://i532.photobucket.com/albums/e...overs/side.jpg
now i can get on with ''modding'' it im going for a sleeper/euro track look nothing spectacular but it will do
cheers steve
your saloon is the actual bollocks stevie. couldnt take my eyes off it when you pulled in
are you piss taking or being serious lolQuote:
Originally Posted by burgo
i think its bollocks lol but at least now she's solid
im being serious.
thank you burgo i was going to come over for a chat as i think you were just behind me on the sunday but i never no what to say lol your saloon made me want one from T.V a while ago on the rollers after that i had to get one
i like your estate looks amazing lol
how she is looking atm
http://i532.photobucket.com/albums/e...overs/1086.jpg
http://i532.photobucket.com/albums/e...overs/1082.jpg
i dont think im going to bother with getting the ats's fitted maybe a set of softstars
looks clean i like the colour :D
cheers
What you clean your exhaust with mate?
t cut on a scouring pad or washing up pad rubbed it all in untill corrosion and so on had gone then just polished it with a polishing cloth and polish took 10 mins
the the 1 or 2 people that look at this lol
in the next couple of weeks i will post some real progress ive been lazy and not done feck all
got my wheels to finish tyres and coilys to get
strip down the panels and do all of the body work
fit a few things etc etc\
stevie
crack on then lad
give us a 2 weeks as i need help from my dad and hes off to florida sunday for 2 weeks then i will crack on
looks kwl mate,
keep it up, wish i could just respray my arches, would never blend in right being red :(
Keep it up fella, looks really nice!!
Ps you can add me to the list of people who follow this thread!!lol
lol will pick up a bit over the next week or so have made progress but not enough to post up yet
lol agree need alot more droppage :)Quote:
Originally Posted by General Baxter
get saving and get them coilovers
i am i am lolQuote:
Originally Posted by Gsi_Jimbo
lol good good. looks abit better thou as said for the time being.
Bet it handles a little bit better aswell
lol it's ok havent really bothered starting to modify it yet just put on what i got given get the body mint and then i will start should be week after next
and 1st is new tyres for my wheels
then coilovers
well not much of an update but ive fitted my cav slabs and have had the tracking done and got them balenced imho from a distance they look awefull as the car has been raised slightly due to the wheels and as there white they look huge so coilovers are next
also i have a few things to do and fit this week
i will get pics tommorow please leave you opinions
stevie
looks good and is now project upside.
what do we all think then aye?
http://i931.photobucket.com/albums/a...ie--p/1031.jpg
http://i931.photobucket.com/albums/a...ie--p/1011.jpg
nah.. its not the look i know you want ;)
it needs to be slammed and some 14 inch deep dish wheels ;)
lolyou no your right but dont rub it in lolQuote:
Originally Posted by mayhem
got my wheel on and bay cleaned up again starting to like the slabs a little more will get the bay spotless and strutbrace on and new bolsters on the seats and de badged this week hopefully and im just saving for the coily's now.
a few pics
http://i931.photobucket.com/albums/a...--p/1011-1.jpg
http://i931.photobucket.com/albums/a...p/100_0495.jpg
http://i931.photobucket.com/albums/a...p/100_0506.jpg
http://i931.photobucket.com/albums/a...p/100_0504.jpg
http://i931.photobucket.com/albums/a...ie--p/1010.jpg
Wheels look good :thumb: Whats parked next to the saloon is it a GTO ?
Great looking car you have there stevie, i will be trying to make a badgeless grill, the same type as yours soon, i will let you know how i get on. Shame your name isn't loyd, going by the no. plate.
that would be great if you could fella lol i was going to sell the plate to a freind darren lloyd but decided to keep it as there still origanal plates and no its a corvette lol
thanks
Got a pic ? :)
ill send you money today for the strut brace :thumb:
ok n.p and yes hold on ill get some up
few pics for cle (looks much better in the flesh)...
http://i931.photobucket.com/albums/a...--p/1093-3.jpg
http://i931.photobucket.com/albums/a...IMG_1008-2.jpg
http://i931.photobucket.com/albums/a...e--p/006-3.jpg
:eek:
Yeah i will be trying to. Very nice vet btw is it yours.Quote:
Originally Posted by stevie-p