also just to add that when its all warmed up and does idle on its own then the idle speed is really low , 500 indicated on std rev counter
Printable View
also just to add that when its all warmed up and does idle on its own then the idle speed is really low , 500 indicated on std rev counter
hmm xes have a different type to what i was thinking. it does sound like thats whats not working the riggy. you tried adjusting the throttle stop to see if that helps
no not yet burgo , have seen some xe's with a clamp round accl cable , but surley idle should be ecu controlled
Tried tps?
it should but until you find out why its not adjusting the throttle stop should help.
no not tried tps paul , not got a spare one , would that only affect idle though is it drives fine ?
Proper 3 wire valves. Not motors like c14se's etc etc.Quote:
Originally Posted by burgo
Cant see it being the throttle stop tbh, if the engine speed is low the ecu should "see" it and open the icv to compensate until its happy with the speed. Unless someones adjusted the throttle stop previously.
IIRC my non lambda gte loom had a "GQ" ecu.
lol should i mention the engine used to be baxters haha
Need i say more?
lol lol
:roll: you serious lol your lucky it runs at all thenQuote:
Originally Posted by Riggy