Project C20 NVA

Anyone know how to do the breather mod ?!?!

wow,fantastic work here mate,just wondrin if u work in that bodyshop or u just there at the weekend??

Breather mod-
Remove the plate out the cam cover, and drill holes in it to allow oil to drain back into the head/cam area instead of getting forced into the throttle body.

Full details are found here on Maxboost :-

http://www.max-boost.co.uk/max-boost...entilation.htm

This is what I've done to my plate

Joff

Quote:

---

Originally Posted by ward

wow,fantastic work here mate,just wondrin if u work in that bodyshop or u just there at the weekend??

---

I do work in a bodyshop which does make the work quicker and easier, but i only got from 8 till half 12 on saturday mornings to do work to the car !


Cheers for the info guys :thumb:

Just take the plate off and cut off the last part then put that back on. Don't forget to clean off all the sealer thats left (very important).
http://img.photobucket.com/albums/v4...reathermod.jpg
Its basically what SBD tell you to do here. I like to keep the plate bolted on in three places instead of just the two.

Im sick of the site of smooth hammerite ! So meny parts to paint. Been busy painting loads of parts over the last few days. The engine block is all painted and the cams have been removed so i can swap them with the courtenay cams from my other car.

One of the bits i painted was the g/box:

http://img2.putfile.com/thumb/5/12114412422.jpg

And more g/box bits:

http://img2.putfile.com/thumb/5/12114412496.jpg

all done:

http://img2.putfile.com/thumb/5/12114412591.jpg

I also gave the hub carriers a lick of paint. Hopefully all the suspension parts will be finished for the weekend. Want to get the nova on its wheels and the engine in !

http://img2.putfile.com/thumb/5/12114412517.jpg

Another bargain, pipercross vector, ?10:

http://img2.putfile.com/thumb/5/12114412530.jpg

Also can anyone tell me if the inlet manifold can be fitted after the engine has been fitted, remember i have no upper bulkhead !?!

Quote:

---

Originally Posted by Dar

Just take the plate off and cut off the last part then put that back on. Don't forget to clean off all the sealer thats left (very important).
http://img.photobucket.com/albums/v4...reathermod.jpg
Its basically what SBD tell you to do here. I like to keep the plate bolted on in three places instead of just the two.

---

Nice one :thumb:

Collect a little plate froma bloke from another forum tonight. Was tested in TV he told me. Will see how it fits tomorrow, if not i will just do dar's conversion.

LOL, done both breather mods ! Pics to follow.