Benn's on going build

Printable View

Show 40 post(s) from this thread on one page

11-02-10, 01:52 AM
Connor

Benn as scott said above i think it will suit your car,
only thing i will say though my friend has one on his lupo gti,
after a month he took it off and realised really tiny grit
had got underneath it and scratched his lacquer sheet loads
he managed to polish them out, but never put it back on
It was a tight fit, and was fitted correctly
but just a heads up as your paint work is spot on :thumb:
11-02-10, 02:02 AM
scott.parker

Humm not 100% sure if this would work, but a small bead of claer silicone could stop any dirt getting under it?
11-02-10, 08:04 AM
Benn

Quote:

Originally Posted by The Simps

Will decide on the bra once its all together.

You didn't really buy it tho did you? You just got Sharon to sow together some garments from ur dungeon! I bet it unzips to ;)

lol i know your joking cause as far as i know Sharon cant sow.

Quote:

Originally Posted by scott.parker

I think the bra will suet your car, as it's the type of car to keep from getting fooked, rather then some cav putting one on as it's "cool" etc.

As for 3M rubbery underseal, love it dude, can you please PM some details,as i will be needing some for my MK1's underside etc?

Scott

Cheers dude, i wanna see what it looks like when the front back together..
What details do you want? Its made by 3m, the part numbers in the pic. You need a nosal to spray it, its 2pac and its awesome.

Quote:

Originally Posted by ConnorLake

Benn as scott said above i think it will suit your car,
only thing i will say though my friend has one on his lupo gti,
after a month he took it off and realised really tiny grit
had got underneath it and scratched his lacquer sheet loads
he managed to polish them out, but never put it back on
It was a tight fit, and was fitted correctly
but just a heads up as your paint work is spot on :thumb:

Want a new bonnet anyway, but yes this is a concern as its a tight fit. Something i did think about when i fitted it.

Quote:

Originally Posted by scott.parker

Humm not 100% sure if this would work, but a small bead of claer silicone could stop any dirt getting under it?

Nah it wouldn't and i wouldn't wanna mark the bonnet with silicone..
11-02-10, 09:26 AM
The Simps

Quote:

Originally Posted by Benn

lol i know your joking cause as far as i know Sharon cant sow.

Love it! lol
11-02-10, 03:23 PM
muzzy

It's been quite a while since i've read through this, the attention to detail is nothing short of amazing :cool:
11-02-10, 03:44 PM
T0M91

Keep up the good work fella's!!
11-02-10, 07:06 PM
Benn

Quote:

Originally Posted by muzzy

It's been quite a while since i've read through this, the attention to detail is nothing short of amazing :cool:

Good read? lol Thank you very much i try.

Quote:

Originally Posted by T0M91

Keep up the good work fella's!!

Will do!

Went to swap my turbo inlet last night, found moisture has been getting in and mixing with some oil that's sat in there..

http://i6.photobucket.com/albums/y23...ndinlet7-1.jpg

All the breather/ic pipes are clear so i know its ok there, so guessing its getting in from where the silicone hose joins, but then surely i'd have have an air leak there?

James, see the small cut out where the air in hole is? On the turbo there's a lip that sits in there..

http://i6.photobucket.com/albums/y23...landinlet6.jpg
11-02-10, 07:37 PM
muzzy

Very good read, took me a good bit of time as i started from the beginning again lol
11-02-10, 07:42 PM
Benn

Glad you enjoyed it, :)
11-02-10, 07:56 PM
Count Vaux Alot

Quote:

Originally Posted by Benn

Good read?

James, see the small cut out where the air in hole is? On the turbo there's a lip that sits in there..

Keh??? not sure where you mean mate?

Show 40 post(s) from this thread on one page