Printable View
Thank you Sir,Quote:
Originally Posted by Fester
Cheers Si, i just didn't want silver staples showing up. Might not work yet..Quote:
Originally Posted by The Simps
Gonna do a bit more in a few.
Yeah i know, jigsaw fail. But you cant see them so i didn't to make them better.. This spray is a contact adhesive.. That's why its awesome!Quote:
Originally Posted by djbrowney
Where's my brace..lol
went down the work shop yesterday and there was a fook of piece of material sat in the laith so there started lol
What are you making Mr browney?
So, Ben hates waiting for anything...lol
J its something pretty for me :)
Spent the morning getting the block clean with break cleaning, then doing the same on the sump.. Used a bead of Rtv on the block side. Got all the sump back up (was a ******* doing it in car as i knew and made my arms kill, but did it) Gave it a wipe off and have left it to set and dry for as long as poss.
http://i6.photobucket.com/albums/y23...n/IMG_8658.jpg
(Yes the know the level sensor looks poo, i wanna get a plate made up to replace it but haven't been able to yet)
Gave the down pipe a good clean off with break cleaner again, as it had got stained with oil from the leaking sump. Now the flange on my down pipe is a tiny bit warped from when it was made, it blows a very tiny bit (cant hear it that much, but you can see moisture bubble from the gap. So having already given it a light file, i gave it a little more then wiped a really fine layer of exhaust pasted on it then got it all bolted back up.
With the 3" down pipe getting to the bolts isn't that easy. So any one that's got one or thinking of getting one.. Get one of theses. Makes getting to the rear bolts much easier.
http://i6.photobucket.com/albums/y23...n/IMG_8661.jpg
Then moved to cleaning the under side of the cross member off, as i wanna use the under seal that's used in the arch's on it then repaint it. Gave it a wire brushing off.
http://i6.photobucket.com/albums/y23...n/IMG_8663.jpg
Then went to Dan and Sharon's and cleaned Sharon's Nova..
as said you need more sheilding gas and possibly more power to get the welds neater and with penetration.
This really is a superb build though, well done
Penetration seems ok as even small tacks are strong as, looking at parts to get a new lance on Dan's welder as it works nicer. Cheers for the tips.
Thank you too.
Whats the under seal called that you have used on the inner wings Benn ?
Its a 3m rubberised sealant.
Is the best stuff going, its a 2pac sealant but its ment to be sprayed using a nozzle you have to buy. But this time as its a small bit i'm using a paint bush to put it on.
I'll get you a pic of the bag it comes in for a part number tomoz...
Looking good Benn :thumb:
Cheers J, get on msn.