Spaceframed SR20DET RWD Nova

The plan is to just find a piece of hollow tubing around 1/2" larger bore than the exhaust and at least a good 3/4mm thick and chop it in half. Gring out the sill and weld in place the half pipe.

Well thats the plan anyway! lol

why do you make it sound so easy! but what backbox are you having? as ive got the cavi btcc backbox and the box is quite big so going to find it hard to mount it right. will you have the same problem?

Quote:

---

Originally Posted by The Simps

Hope this helps you mate...

http://img.photobucket.com/albums/v3...5-10-085-1.jpg

---

thanks for the pic mate, so basically its cable ties through the fan holes and then through the rad fins and round the rad elements and back through, sorry for the confusion, can hardly read the writing on pic lol:thumb:

Quote:

---

Originally Posted by BIGS

why do you make it sound so easy! but what backbox are you having? as ive got the cavi btcc backbox and the box is quite big so going to find it hard to mount it right. will you have the same problem?

---

I've got a parts bin exhast system to go on! lol a long straight with 2 powerflow boxes that came off a xe tigra and a rage 4" universal backbox. just need a 90 deg bend of which my mate has a pipe bender :D

Quote:

---

Originally Posted by belly257

thanks for the pic mate, so basically its cable ties through the fan holes and then through the rad fins and round the rad elements and back through, sorry for the confusion, can hardly read the writing on pic lol:thumb:

---

It doesn't come back through. Think of it as a flexible plastic nut and bolt. You push the nuts on and it clips up like a cable tie then you chop off the excess.

Nice :D

thats what i thought! lol

its a budget trackcar and more than up to the job. Th price was right too. Free :D

Quote:

---

Originally Posted by The Simps

It doesn't come back through. Think of it as a flexible plastic nut and bolt. You push the nuts on and it clips up like a cable tie then you chop off the excess.

---

ah i see, are these cheap/easy to get hold of? otherwise i may just use cable tieslol

Quote:

---

Originally Posted by The Simps

I take it that if I'm at the bottom of my adjuster platform, by going for shorter springs it will bring it down more?

What poundage would you suggest for traack use? (bearing in mind its f28)

---

Yup - you're totally correct... if you're at the bottom of your threads, say, on an 8" spring, directly changing to a 7" will lower it by a full inch respectively, so on and so forth :thumb:

Poundage - it's such a personal taste, I had 313lbs on the front of mine and yet it just didn't feel enough... so I've gone to 350lbs now on a 7incher...

I would be inclined to advise a 325lb, to take into account your F28 badboy, and the fact I presume you'd drive it on the roads too?

Quote:

---

Originally Posted by belly257

ah i see, are these cheap/easy to get hold of? otherwise i may just use cable tieslol

---

Yeah, I think I paid something like £11 delivered for a new kit from rally design.