yes sorry lol
Printable View
yes sorry lol
oh dear there is something up here..
you know 27psi will nuke it lol
get that oil cooler on asap
its hasn't yet I was running that for about a week last time, since I have had a new rad the gauge never really moves past half way.. I will get the cooler on soon though..
holy cow thats made a hell of a differance, might have to get your mate to do my fuel plunger aswell :thumb:
lol if you want mate.. :)
I would recommend turning the fuel screw down when fitting it though lol
Might get some one to take a photo of it
good stuff :) don't you mean the machined one on the right?
I'll take a pic of your smoke for you next time we're out :thumb:
and lol at your quad posts
yeah thats what I ment
Well I Have had a leaky fuel tank for a while now, so finally decided to get the new one fitted.
here is how she come..
http://i818.photobucket.com/albums/z...t/DSC01641.jpg
http://i818.photobucket.com/albums/z...t/DSC01642.jpg
And after a clean up with the wire wheel
http://i818.photobucket.com/albums/z...t/DSC01643.jpg
http://i818.photobucket.com/albums/z...t/DSC01644.jpg
Looks better aye, any way quick coat of red oxide
http://i818.photobucket.com/albums/z...t/DSC01645.jpg
http://i818.photobucket.com/albums/z...t/DSC01646.jpg
She will be getting a couple of coats of black gloss tomorrow then fitting on Friday along with my rear beam bushes! :)
looking good :thumb:
Ta, its black now! will add a photo later. I am just going to wash her and apply a quick coat of wax!
Ta, its black now! will add a photo later. I am just going to wash her and apply a quick coat of wax!
awesome :) you G3'd the whole thing yet? and i almost washed mine tonight, then remembered its being painted so whats the point lol
Yeah, g3'd then t-cut'd, then waxed. Finished it on Saturday
spot on :) you can do mine once its painted then lol
where are these pictures then? lol
There aint any.. will get them tomorrow! I would rather not btw lol
pah, it never happened then. its still in primer lol
yeah i figured you would say that too lol
Well guys I am well over due a update so here it goes...
I fitted the tank
http://i818.photobucket.com/albums/z...t/DSC01648.jpg
http://i818.photobucket.com/albums/z...t/DSC01651.jpg
http://i818.photobucket.com/albums/z...t/DSC01649.jpg
http://i818.photobucket.com/albums/z...t/DSC01653.jpg
http://i818.photobucket.com/albums/z...t/DSC01650.jpg
was a bit of dirty job, ended out covered in diesel and waxoil but never the less got it done and it stopped my fuel leak (turns out the tank had a hole in it)
Next off I fitted some steels so I could refurb my alloys and fit some new tyres..
they just clear the calipers :)
http://i818.photobucket.com/albums/z...t/DSC01664.jpg
http://i818.photobucket.com/albums/z...t/DSC01665.jpg
http://i818.photobucket.com/albums/z...t/DSC01667.jpg
They don't look to bad either :)
any way the following weekend I finished off my boot build thingy..
http://i818.photobucket.com/albums/z...t/DSC01673.jpg
http://i818.photobucket.com/albums/z...t/DSC01674.jpg
http://i818.photobucket.com/albums/z...t/DSC01675.jpg
http://i818.photobucket.com/albums/z...t/DSC01678.jpg
http://i818.photobucket.com/albums/z...t/DSC01679.jpg
http://i818.photobucket.com/albums/z...t/DSC01682.jpg
http://i818.photobucket.com/albums/z...t/DSC01683.jpg
http://i818.photobucket.com/albums/z...t/DSC01684.jpg
Looks pretty tidy I think :D
Then a few weeks later I set about my wheels..
http://i818.photobucket.com/albums/z...t/DSC01686.jpg
How they started
http://i818.photobucket.com/albums/z...t/DSC01687.jpg
and preped..
http://i818.photobucket.com/albums/z...t/DSC01719.jpg
http://i818.photobucket.com/albums/z...t/DSC01720.jpg
http://i818.photobucket.com/albums/z...t/DSC01721.jpg
http://i818.photobucket.com/albums/z...t/DSC01722.jpg
http://i818.photobucket.com/albums/z...t/DSC01723.jpg
I thought I might aswell do my wiper arms and grab rail as well while I had the gun out ..
Primed
http://i818.photobucket.com/albums/z...t/DSC01724.jpg
http://i818.photobucket.com/albums/z...t/DSC01725.jpg
http://i818.photobucket.com/albums/z...t/DSC01726.jpg
http://i818.photobucket.com/albums/z...t/DSC01727.jpg
http://i818.photobucket.com/albums/z...t/DSC01728.jpg
They just need a light wet and dry and then am ready for top coat..
I also made a scuttle cover
http://i818.photobucket.com/albums/z...t/DSC01696.jpg
http://i818.photobucket.com/albums/z...t/DSC01697.jpg
http://i818.photobucket.com/albums/z...t/DSC01695.jpg
looking very nice dan
ill have a good noisey round it at pv you fancy knocking one of those scuttle covers up for mine for some monnies
Have you cut them hinge holes out more? as the left side as you look in the bay will catch like a bugger, and the other might a bit too..
Everythings looking good mate, you re-doing your front bumper to?
Scott
I attended National Day
http://i818.photobucket.com/albums/z...t/DSC01706.jpg
And then yesterday the real fun started :)
First off I showed Lewis how to remove Nova screen :)
http://i818.photobucket.com/albums/z...t/DSC01729.jpg
And then I started stripping my front end for paint
http://i818.photobucket.com/albums/z...t/DSC01730.jpg
http://i818.photobucket.com/albums/z...t/DSC01731.jpg
http://i818.photobucket.com/albums/z...t/DSC01732.jpg
http://i818.photobucket.com/albums/z...t/DSC01733.jpg
http://i818.photobucket.com/albums/z...t/DSC01734.jpg
http://i818.photobucket.com/albums/z...t/DSC01735.jpg
http://i818.photobucket.com/albums/z...t/DSC01736.jpg
180gritted and then filler added
http://i818.photobucket.com/albums/z...t/DSC01737.jpg
http://i818.photobucket.com/albums/z...t/DSC01738.jpg
http://i818.photobucket.com/albums/z...t/DSC01739.jpg
Blocked
http://i818.photobucket.com/albums/z...t/DSC01740.jpg
http://i818.photobucket.com/albums/z...t/DSC01741.jpg
http://i818.photobucket.com/albums/z...t/DSC01742.jpg
And then me Lewis, Rob and Cookie sat down for lunch
Lewis cooking
http://i818.photobucket.com/albums/z...t/DSC01743.jpg
http://i818.photobucket.com/albums/z...t/DSC01744.jpg
Yumm
Back to work, just a quick view of the garage and 3 novas :)
http://i818.photobucket.com/albums/z...t/DSC01745.jpg
Lewis'
http://i818.photobucket.com/albums/z...t/DSC01746.jpg
Mine
http://i818.photobucket.com/albums/z...t/DSC01747.jpg
and Cooksters
http://i818.photobucket.com/albums/z...t/DSC01748.jpg
My bonnet after more filler
http://i818.photobucket.com/albums/z...t/DSC01749.jpg
Cookie masking and being biatch :)
http://i818.photobucket.com/albums/z...t/DSC01750.jpg
looks sweet dude
http://i818.photobucket.com/albums/z...t/DSC01751.jpg
Done
http://i818.photobucket.com/albums/z...t/DSC01753.jpg
http://i818.photobucket.com/albums/z...t/DSC01754.jpg
http://i818.photobucket.com/albums/z...t/DSC01756.jpg
primed
http://i818.photobucket.com/albums/z...t/DSC01757.jpg
http://i818.photobucket.com/albums/z...t/DSC01759.jpg
http://i818.photobucket.com/albums/z...t/DSC01760.jpg
http://i818.photobucket.com/albums/z...t/DSC01761.jpg
Slam panel primed
http://i818.photobucket.com/albums/z...t/DSC01762.jpg
http://i818.photobucket.com/albums/z...t/DSC01764.jpg
I then gave it all a rub down and panel wiped it.. out came the 10L and on went the paint :D
http://i818.photobucket.com/albums/z...t/DSC01766.jpg
http://i818.photobucket.com/albums/z...t/DSC01767.jpg
http://i818.photobucket.com/albums/z...t/DSC01768.jpg
http://i818.photobucket.com/albums/z...t/DSC01769.jpg
http://i818.photobucket.com/albums/z...t/DSC01770.jpg
http://i818.photobucket.com/albums/z...t/DSC01771.jpg
http://i818.photobucket.com/albums/z...t/DSC01772.jpg
http://i818.photobucket.com/albums/z...t/DSC01774.jpg
Bearing In mind I am only self tought, I think it come out well
http://i818.photobucket.com/albums/z...t/DSC01776.jpg
Any way update over.. oh and lewis' car is now very shiney black :)
http://i818.photobucket.com/albums/z...t/DSC01775.jpg
Craig, yeah we can sort something out
Scott, I had to trim more off :(
And Derick, cheers Pal
Did you re make one from that white one that was broke earlier in your thread, as that one looks like one i gave to Dan16v on here, if its got lots of sticky stuff on it, then its the one i made, first one i did from 4mm foamex in 2004?
No dude Made mine from a microwave box template and then use a old foamex sign from work to make it. I made two tho. one for me and one for Lewis
looks great mate it`s guna be one of the best nova`s on the stand
thank you but am not sure about that lol,.. It will hopefully be the best diesel though..Quote:
Originally Posted by Dervy
Good work
is that because it'll be the only diesel?Quote:
Originally Posted by Balley
Cool cool, did you ever see them ones i made for some members then? as i ended up not laminating them all with real alloy finishes, but i got some made with alloy/foil vinyl on and then routed round a template i have, but i don't need one in my track car lol
Yes maybe lol. Mark should be there hopefully though..Quote:
Originally Posted by burgo
Thank you sir.Quote:
Originally Posted by Count Vaux Alot
I don't think I have, I have seen a carbon one before, think it was that fancy Red Gsi Rep .. and I have seen benns but thats all!Quote:
Originally Posted by scott.parker
looks spot on dan :) do you want those pictures i took in here too?
Thank you, Yes and the Naughty Video :P