done well mate.
nice to see you get over any problems you come across:D
Printable View
done well mate.
nice to see you get over any problems you come across:D
You don't hang about do you?, I've got some braided oil hose, 1/2in, 5/8 and 3/4 if it's of any use to you?
Nice, the willwoods look cool.
I think I'm just going to use rubber hose Tom, that way I can jubilee clip it.
?130 + VAT is extorsionate for 2x 15" lengths!
WTF
?130 + Vat for 2 hoses 15" long :eek::eek::eek:
I thought Pirtek were supposed to be cheap,Lol.
I have some -10 aeroquip hose sat around iirc.
You would need to have some -10 fittings welded onto your cooler mate.
Not worth the aggro IMO
Hydraulic hose will do it fine, ran it on my let with jubilees without a problem, not how I would do things now but it did work for me then so i expect you would be fine with it too
Cool, thanks for la gen!
Just sorted out some spigot rings for disks and some spacers being made up for my wheels :)
Olly that fitting is the wrong way. You can see its tapered. Undo it and have a look at the other end, that should be coned to fit the fitting. The taper should go into the caliper.
how very embarressing that I didn't notice that! they just came like that from the previous owner! hey ho... thanks loads rick!
new strut brace arrived, excellent service from www.strutbracer.co.uk worked out at ?58 delivered
http://i136.photobucket.com/albums/q...ure/nc0388.jpg
got my bolt to stud conversion from ebay, should save alot of hassle lining up spacers and wheels etc
http://i136.photobucket.com/albums/q...ure/nc0389.jpg
fitted my oil cooler, and sorted pipework out finally
made to cuts in front slam panel
http://i136.photobucket.com/albums/q...ure/nc0382.jpg
so oil cooler could sit flush to "face" of panel
http://i136.photobucket.com/albums/q...ure/nc0383.jpg
made up some 90? angles with holes in
http://i136.photobucket.com/albums/q...ure/nc0385.jpg
offered it up Dar stylieee
http://i136.photobucket.com/albums/q...ure/nc0384.jpg
looks nice...
http://i136.photobucket.com/albums/q...ure/nc0386.jpg
pipework sorted, and very clear of pulley
http://i136.photobucket.com/albums/q...ure/nc0387.jpg
However all that is useless, and it's got to be moved again as now my grill doesn't fit lol :mad:
Probably should have checked that aswell, before doing it!
Hey ho!