The fastest Nova in the world

Quote:

---

Originally Posted by Stuart

Lol why you needs extra boost controlzzzzzz tbh I wondered too, but don't care as its your build and your plans etc so if it works it works.

shame nlr aren't looking at CAN :( I'd offer help if he wants etc

---

I asked that and said you offered but he totally brushed over the offer, he has other things he wants to roll out before the CAN
I have heard of these little Gizmo's that take an analogue voltage and put it out over CAN


Sent from my iPhone using Tapatalk

Isn't that what one of your motec boxes are, the e88 or something?

Some time ago the MightyCarMods boys did a Subaru estate with an EJ36 engine (quad cam flat 6) with lots of Haltech modules in it. Seems to me these modules do something similar i.e. convert an analogue signal into a CAN signal. Having said that, I am under the impression not all CAN signals are interchangable and that you can't go mixing and matching CAN boxes of different makes.

Quote:

---

Originally Posted by Stuart

Isn't that what one of your motec boxes are, the e88 or something?

---

The E888 is an expander, gives me a bunch more inputs, not that I needed them but it does take upto 8 thermocouple inputs which the Ecu can't do, so I'll be monitoring exhaust gas temps per cylinder.




Sent from my iPhone using Tapatalk

Quote:

---

Originally Posted by nova_niek

Some time ago the MightyCarMods boys did a Subaru estate with an EJ36 engine (quad cam flat 6) with lots of Haltech modules in it. Seems to me these modules do something similar i.e. convert an analogue signal into a CAN signal. Having said that, I am under the impression not all CAN signals are interchangable and that you can't go mixing and matching CAN boxes of different makes.

---

Yeh I've seen the Haltech and racepak stuff use al separate little modules to make up a network, why I'm not too sure, seems a long way to do things.
Again my CAN knowledge is basic, but I believe as long as you can get the devices talking the same language at the same speed on the same network you can get anything to talk, it's finding those details that's a bit tricky.


Sent from my iPhone using Tapatalk

Quote:

---

Originally Posted by nova_niek

Some time ago the MightyCarMods boys did a Subaru estate with an EJ36 engine (quad cam flat 6) with lots of Haltech modules in it. Seems to me these modules do something similar i.e. convert an analogue signal into a CAN signal. Having said that, I am under the impression not all CAN signals are interchangable and that you can't go mixing and matching CAN boxes of different makes.

---

Supergramps!

Quote:

---

Originally Posted by heds

The E888 is an expander, gives me a bunch more inputs, not that I needed them but it does take upto 8 thermocouple inputs which the Ecu can't do, so I'll be monitoring exhaust gas temps per cylinder.




Sent from my iPhone using Tapatalk

---

i read the manual for that and it implied you can drive some outputs over CAN too.

niek, you're right that not all CAN is equal, as there are speeds, addresses, data layouts and message lengths at hand, but with the sniffing tools like kvaser you can work it out fairly fast, or use the Internet as many are well geeked lol

Bens doing a fab job, see what I did there [emoji13]
Very happy with the drivers cell

http://uploads.tapatalk-cdn.com/2016...fdbd0415c5.jpg

Certainly going to feel a lot safer climbing into here than before

I bet that wasn't the easiest piece of tube he's ever shaped

http://uploads.tapatalk-cdn.com/2016...e1bdd3751d.jpg

http://uploads.tapatalk-cdn.com/2016...19f598f15d.jpg


Sent from my iPhone using Tapatalk

Looks the bees knees that mate. You going for tubed rear end of car aswell ?

Have been enjoying your pics on Instagram. The driver looks nice be safe now