sorry but thats impossible for a 1.2, they must have not been trying, My mate has a zetec s with miltek exhaust and k&n filter and it absaloutly(sp) hammers my 1.2iQuote:
Originally Posted by bigdan1
Printable View
sorry but thats impossible for a 1.2, they must have not been trying, My mate has a zetec s with miltek exhaust and k&n filter and it absaloutly(sp) hammers my 1.2iQuote:
Originally Posted by bigdan1
obviously i wouldnt beat in a straight line .. but honestly round bends and built up areas my nova corners like a housefly :DQuote:
Originally Posted by Cle
and also i have very big stones 2 back it up which makes alot of difference
i didnt think you had a license or your car ran or was road worthy ?Quote:
Originally Posted by Cle
no iv neva lost my lisence, my car neva fails on me and it passes every m.o.t without nothing going wrong! so dunno where you've got this info from!Quote:
Originally Posted by novaxe235
Cle;the 1.2 carb has 10bhp more than the 1.2i from the factory i think so the carb would be quicker anyway
Incase anyone want som info on the Cams...
Lift
Inlet Exhaust
12ST - 5.1mm 5.5mm
12NV 4.7mm 5.1mm
13S/SB 6.0mm 6.0mm
So you can see that just by changing cam to 1300 Cam would give some half decent gains, even moreso on a later 12NV model engine.
The Kent Cams
Kent AST1 Sports 6.24mm 270 degrees
Kent AST11 Sports 6.09mm
Kent AST18 SuperSports R 7.75mm 304 degrees
Kent AST19 Race Spec 7.46mm 313 degrees
Kent AST17 Supersports 6.95mm 284 degrees
More info is available on the Kent Cams site
Kent cams states that the AST1 give 10bhp increase on 1300 engine ;)
Just bought a kent high lift cam and pulley for my 1.2carb on ebay for £46 :)
Bargain, I'll check the lift on the various kent cams to add to above list
I know i couldn't believe i had won it as i was at work when it ended and i thought i was going to be out bid at the last minute as usual! lol
Im not sure if I should get twin wbers or just a 32/34 weber carb on a 1.3mani??i can get an irmscher inlet mani for the twin webers for 50euro off a guy over here lik!
Twin 40s. I posted a "guide" for jets for twin 40s including a 1200 engine in the articles section. Check that out.
Or do what I'm doing on the High Comp 1.4....Bike carbs!