Printable View
http://i271.photobucket.com/albums/j...1401/019-1.jpg
put my mesh grill back together for the first tim since 2004, did it properly this time. ground and filed all the excess old grill away so you cant see it from the front, glued a couple of brokenm clips, and drilled and screwed it down, also gave it a sand with some 120 grit and its reeady for a repaint next week sometime
http://i271.photobucket.com/albums/j...1401/028-1.jpg
These arrived from Berlin yesterday morning, was greedy so i had both as i may go for the twin reverse look and fit a cool led fog unit, not sure yet? Got the Fairy Liquid and the tooth brush on them earlier to
http://i271.photobucket.com/albums/j...ie1401/024.jpg
Euro or Clears?
http://i271.photobucket.com/albums/j...1401/026-1.jpg
Opel Corsa A :cool:
http://i271.photobucket.com/albums/j...ie1401/025.jpg
De-oranged my front indicators to, dont like the fried egg look! Will be fitting Ring Enigma bulbs which are a silvery blue bulb
Quote:
Originally Posted by sparkie1401
Euro look fella without a doubt... :)
Though you would need to swap your wiring loom round for that to work properly mate.
Scott
no i wouldn't the auto electrician would lol i dont do wiringQuote:
Originally Posted by scott.parker
cheers Nick, your prob right. with a nova as good as yours i'd be silly not to listen
Get some LED's for the indicators mate, go on ebay, there about £6 a pair.
Scott
http://i271.photobucket.com/albums/j...ie1401/305.jpg
Actually started to fit the oil cooler today, after taking theses pics i went to the garage and made some shiny brackets up, did some drilling, filed my grills for clearence, then on my return found some old seat spacer and matching allne bolts which have made it a much better fit (more accurrate pics tommorow)
And the left mounting point will be just right of the O/S headlight not on the cross member/slam panel as you can see it now
gave the oil cooler a bit of a wire wheel, gona do it by hand tommorow to get in all the nooks an crannys, its getting lacquered and the fins are gonna be black
tommorow will fit 100% now ive dummy fitted it and im happy, shiny brackets which ive made and drill holes for the stailnless "p" clips for the braided oil lines, once i have the pipes fitted i can send them back to have them cut to the correct lengthand have the correct end fitted
http://i271.photobucket.com/albums/j...ie1401/306.jpg
Cleaning up the original bracket i made from the original oil cooler surround,since i took the pics ive made shiny ones and its a bit smaller as im gonna fit the bracket just behind the grill, right of the O/S light!
http://i271.photobucket.com/albums/j...ie1401/304.jpg
Oil cooler and Mesh grill in place
http://i271.photobucket.com/albums/j...1401/303-1.jpg
Standard grill which i think i prefer at the minute???????, and you cant see the Oil cooler as easy
more pics to tell the full story tommorow
Also made a Shiny Bracket to support the engine loom and induction Hose
tommorow = bumper off, drill holes mount cooler for good and position hoses correctly then get em sorted to the correct length next week
Better pics to suite the above explannations tommorrow
If you have both euro lights, I'd say make a matching set ie semetrical, definately not clears
id use 2 fogs uk and euro, and id cuth the orange indicators out oth the 2 fogs and replace with the clear indicators out oth the clear rears like nick carros old nova