Id replace it personally and the boltQuote:
Originally Posted by Benn
Printable View
Id replace it personally and the boltQuote:
Originally Posted by Benn
What? Bolt yes.
Both the plate and the bolt
Why the plate?
Sorry not the plate the line and the bolt
Ah yeah if i really need to run it then yeah i'll have to both.
Result!! :D
Right i've pulled the cooler and sandwich plate off. The cooler had no oil in it, i wonder what temp the thermostate in the sandwich plate opens at...
Had peeps says you need the cooler others say you do... What do i do?
The shaft seems very close to the chassis tho.. Can nova tie bars be fitted on the wrong side?
Think it opens at about 100 degrees but I might be wrong. I've personally fitted them to every let conversion I've done, never an xe though.
Tie bars are same both sides. Wheel moves back a lot when you lower car so shafts obv do too. I have fitted lower front tie bar brackets etc to move the wheel back forward a bit more.
Set up is the same as before on the xe, so nothing should be different really.
Might just seem very close.
If its 100deg, then should witht he rad fan comming on and off that must be up around that so it would have opened, but the cooler didnt have any oil in it..