ffs i couldnt find them n made my own :(
Printable View
ffs i couldnt find them n made my own :(
Sel imperial site, there £17.00 each + panp direct guys!
Same seller a on eBay lol crashrepairparts! I need a pair eventually lol
Close ratio cluster, gearbox seal & gasket kit & 3 door hatch passenger side rear quater panel :)
got a load more bits thismorning
http://img41.imageshack.us/img41/5152/trackrods.jpg
wide track rods 330mm rather than standard 295mm
and rose joints
for the tent wanting guys they've got a number of different ones in my local argos clearence place, very cheap can get full details of each if you want
lol I've got a bailey DV that I was just going to chuck away, might try and sell it!Quote:
Originally Posted by TeddyThom
Does it work? How much you want for it? I think I may have been screwed around my some dodgy seller, currently trying to find why the DV isn't working. Possible seals have gone/leak in the system.Quote:
Originally Posted by Jack
Driver cpc card thing. The usual suspects, the departed and dazed and confused from amazon. :)
dont you have a diesel?Quote:
Originally Posted by TeddyThom
Nova front & rear ARB, tie bars, Mk2 spoiler & split seat brackets from Colin.
Anyone know what thickness SR/SRi & GTE/GSI ARB's are?
Yup that I do :)Quote:
Originally Posted by burgo
Found this thread as well :clickme:
Hopefully someone has some pictures to go with it.
thats why it doesnt work then lol and you are aware that if you use electric trickery to make it work then it will make your car slower?Quote:
Originally Posted by TeddyThom
Why don't it work then? The thread I found seemed to indicate that it should work...Quote:
Originally Posted by burgo
ok it wont operate in the "normal" sense and as said will make your car slower. on a petrol when the butterfly shuts it creates a wall in affect. on the inlet side of the "wall" vacuum is created which is used to open the dump valve. on the turbo side of the "wall" as the turbo is still spinning it continues to create pressure to the point where so much pressure is created it overcomes the turbo and makes it stall which means as you open the throttle the turbo needs to spool up again aka lag. fitting a dump valve releases this pressure so the turbo doesn't stall and therefore reducing lag.
on a diesel you don't have a butterfly. which means no turbo stall or lag instead you have a constant positive pressure which is good as you come back onto the throttle you have full power available straight away. if you choose to dump out this pressure you need to wait for it to build again hence making it slower.
that seems a very long winded way of putting it but meh i think i makes sense.
Could be leaking as the neck is painted.
As Burgo said, its not ideal on a derv. Its possible to fit, but you need a microswitch that opens it up and what not - I had all this on the cav but had spud remove it before picking the car up.
That aside, the bailey I have is good. Tested it on the Celica when I thought the Forge one might have been leaking so I can vouch for it being Ok.
I have the micro switch etc. the dump valve will open only if I completely crimp one of the pipes. Then and only then does it open.
http://i546.photobucket.com/albums/h...t/0506f320.jpg
As you will notice these arnt the same socket fittings! :s nevermind they 'twas cheap lol
doing a head are we?? :)
Full strip down, freshen up an rebuild ;) never done anything as big as this before so looking forward to it! :thumb:
Iv been told that my turbo fanymold should be here on Wednesday :D
This :D
http://i546.photobucket.com/albums/h...t/2faaea9a.jpg
http://i546.photobucket.com/albums/h...t/036829d1.jpg
http://i546.photobucket.com/albums/h...t/20a8e7e3.jpg
Says made in china lol lol it should do the trick!
ally switch :)
just got to de polish it now lol
https://fbcdn-sphotos-a.akamaihd.net...11037885_n.jpg
That's well lush, where'd you get that from??Quote:
Originally Posted by pie
off ebay mr teddy tom :thumb:
Can you get a full set?? HOw much are they?? PM me a link??Quote:
Originally Posted by pie
no linky sorry dude was out of a calibra breaking, n ye i got a full set
Damn. I want a set... Custom though, and probably no chance of another set...Quote:
Originally Posted by pie
http://i97.photobucket.com/albums/l2...v/9db8650f.jpg
More fantazia goodness :)
Here's what I got the other day...
http://img42.imageshack.us/img42/2075/1003154a.jpg
http://img820.imageshack.us/img820/1516/1003156rx.jpg
... condenser microphone :)
Oh and got 3 screen protectors for my new phone too... £1 from eBay lol
chassis kit turned up today :D about £10worth of steel for £60 lol lol and some screen covers for my phone. hopefully tomorrow my inlet manifold turns up :d
After buying the Recaros I needed a way of fitting them. After a random conversation about seats these were mentioned then I subsequently bought them for a bargain £20!
http://img.photobucket.com/albums/v3...0418-00217.jpg
Fitting issue resolved, now need someone with some nice brown hides to recover them ;)
For a Chuvitt?
I've got them somewhere in the collection. Loved Fantazia, got some really early stuff on tape somewhereQuote:
Originally Posted by John
Correct :thumb:Quote:
Originally Posted by Novasport
These landed for me today, along with my insurance stickyfoot for the nova....
http://i8.photobucket.com/albums/a36...1/237d2398.jpg
always good to hava spares spud :thumb:
Got these turned up yesterday, thought I'd give them a try, and for only £12 posted they'll do til I can find a full original set...
http://i789.photobucket.com/albums/y...m/4f321a80.jpg