Dan's L reg Td SX

Well I have been doing a little more...

The roof was in a poor state so I thought I would make a healthy start with that.

Skim of filler.

https://fbcdn-sphotos-a.akamaihd.net...43245217_n.jpg

Applied a guide coat to the arch.

https://fbcdn-sphotos-a.akamaihd.net...54954588_n.jpg

Finished the filler work on the sill.

https://fbcdn-sphotos-a.akamaihd.net...59639622_n.jpg

And emptied the inside out so I can start cleaning that up too.

https://fbcdn-sphotos-a.akamaihd.net...13749236_n.jpg

https://fbcdn-sphotos-a.akamaihd.net...56607338_n.jpg

I then flatted the roof off and added some more filler.

https://fbcdn-sphotos-a.akamaihd.net...14676199_n.jpg

https://fbcdn-sphotos-a.akamaihd.net...21297086_n.jpg

While the filler was going off I stone chipped the O/S arches

https://fbcdn-sphotos-a.akamaihd.net...44482088_n.jpg

https://fbcdn-sphotos-a.akamaihd.net...63948190_n.jpg

https://fbcdn-sphotos-a.akamaihd.net...47823967_n.jpg

https://fbcdn-sphotos-a.akamaihd.net...08822251_n.jpg

While I was there I did the front panel and the bottom arm mounts.

https://fbcdn-sphotos-a.akamaihd.net...35523483_n.jpg

And after that I removed the bloody sunroof... that was well bonded in!

https://fbcdn-sphotos-a.akamaihd.net...54863885_n.jpg

I then blocked the rear arch down, Very very happy with the finish I have got. Five coats of high build really paid off.

https://fbcdn-sphotos-a.akamaihd.net...34506092_n.jpg

https://fbcdn-sphotos-a.akamaihd.net...13594594_n.jpg

And how I left the roof,..

https://fbcdn-sphotos-a.akamaihd.net...76046447_n.jpg

Shall hopefully have another good update tomorrow.

Dan

Looks really smart lad won't take long now!

Great work mate. Cant wait to see this again! :thumb:

Dan mate your skills and your eye to details have come on loads from when you first joined, im ashamed at how unskilled you make me feel! lol

what stonechip you using dan,
if your using that tetrosyl stuff dont as if you paint over it like i did the paint doesnt key to it and flakes,
id recommend gravi tint or the likes just avoid the tetrosyl

otherwise positive nots its coming on well some serious graft gone into it well done

looking good buddy :thumb:

Fairly coming along now pal,well done

Quote:

---

Originally Posted by honie5

Looks really smart lad won't take long now!

---

Cheers, Hopefully not pal :)

Quote:

---

Originally Posted by Connor

Great work mate. Cant wait to see this again! :thumb:

---

Thanks Connor. Hopefully wont be long.

Quote:

---

Originally Posted by scott.parker

Dan mate your skills and your eye to details have come on loads from when you first joined, im ashamed at how unskilled you make me feel! lol

---

Thank you very much pal, Means alot :)

Quote:

---

Originally Posted by davidfox280585

what stonechip you using dan,
if your using that tetrosyl stuff dont as if you paint over it like i did the paint doesnt key to it and flakes,
id recommend gravi tint or the likes just avoid the tetrosyl

otherwise positive nots its coming on well some serious graft gone into it well done

---

Buggar, That is what I have used! could I use gravi tint over the top? Cheers for letting me know though :)

Quote:

---

Originally Posted by pie

looking good buddy :thumb:

---

Thanks :)

Quote:

---

Originally Posted by raf24

Fairly coming along now pal,well done

---

Not quite at your stage though Craig lol, Thanks though

Nice work chap looks like its well on its way :)