Stoo's DC5

I re-did the Passanger side Gbox mount this morning.

Took it off, opened up the holes and jobs a good un.
Solid! Happy Days http://www.itr-dc5.com/forum/images/...on_e_smile.gif

Got the ETD Removed this afternoon.
Also fitted the remaining 2 engine mounts!

All i can say is....
AWESOME!
Absolutely no wheel hop, kangarooing, engine movement, and best of all......

now the ETD is off aswell, the vibrations aren't half as bad! PERFECT!
Well worth the money, although i reckon the red (60A) compund may be less harsh for pure daily driving.

These little beauts also turned up today...
http://www.rallynuts.com/user/produc...0-1001_600.jpg
:D

Charger arrived today :D Wooooo!
Just a few things i wanna freshen up/renew and then ill look at fitting it and getting it ready for MASE :D

Also my side mounts for my seats arrived today :D

Modified the harness release buckles last night.

When they came, the buckle was permanently fixed to the crotch straps, meaning I HAVE to have 5/6 point friendly seats to accommodate them.

However, quick strip down, jiggles and pokes, and now the buckle is permanently attached to one of the lap straps making them 4point for now, and can be expanded to 6 point at a later date when compatible seats are fitted.

WIN

Gonna go fit them this afternoon :D

Harnesses are in
Rear seats removed :D

Get some pics up Stoo.

Will do when it's daylight mate :)

Ordered new IACV, TB and Inlet manifold gaskets yesterday.
Bought some new injector clips for the RCs

Also ordered whole new fresh nuts and bolts etc for the conversion.
Got the parts list from jackson and ordered up via a UK website, so everything is fresh :)

Going to order some silicone PCV and Vac hose in blue this week to compliment the SFS and coolant hoses too.

Just trying to source a Gatorback belt now.

Not long before i start putting it all together :)

Oooooooh goody gumdrops :)

Well the RC Injector clips i got were utter Toss!!
I was led to believe I was buying plug and play type adapters for the OEM > RC injectors!

Like this....
http://www.corsportusa.com/store/cat...CLIP-BCC_M.JPG

What I actually got was this.... x4

http://www.034motorsport.com/images/...Connectora.jpg

This type are installed by cutting the OEM Injector plug off and soldering these on!
Meaning that if i wanted to go back to OEM at any point, I would have to re-cut and solder the original plugs back on...
Not what I wanted!

So I'm sending them back and have bought a set of plug and play type instead!

Also got a lot of the Stainless Steel bolts/nuts/washers I ordered from Westfield Fasteners. (great site if you need nuts/bolts!)Still got a few more to be delivered.

Ordered the hoses too today.