*INFO* Nova Radiator Info

You probably already know that Novas came with 4 flavours of radiators (five if you include the minor differences on the two derv rads), but I bet you thought that the 1.6 had the biggest whilst the 1.2-1.4 had the medium and 1.0 the smallest.

Well not quite. Here's diagrams, sizes and part numbers for the Nova radiator range, including what engine they were fitted to.

Note that I've added the derv radiators for comparison. As you can see by the size and mounts, these won't fit a petrol chassis.

90136828 530 x 225 x 32mm
10S, E12GV, 12N
http://www.carcooling.co.uk/drawings2/12OL393_11.jpg

90136753 530 x 280 x 22mm
12ST (early), 13N/NB/S/SB (early), 14SE, C14NZ (late), 16SE, C16NZ
http://www.carcooling.co.uk/drawings2/12OL394_11.jpg

90298318 530 x 230 x 34mm
C12NZ, 12NV, 12ST (late), 13N/NB/S/SB (late), 14NV, C14NZ (early),
http://www.carcooling.co.uk/drawings2/12OL395_12.jpg

90298560 690 x 268 x 38mm
15D/DT (early)
http://www.carcooling.co.uk/drawings2/12OL396_10.jpg

90299108 690 x 268 x 38mm
15D/DT (late)
http://www.carcooling.co.uk/drawings2/12OL397_10.jpg

diesel rads do fit a petrol nova, only when running a c20.. you have to keep an eye on the engine mount, some clear them, and some dont.
so it needs a small mod, but they do fit.

ah so my 1.2 rad is the same as a gsi one? as it has the T.C nearer the bottom?

No, it'll be a short type one on "stilts" /\

Ah very good info. Never founds pics before to sow people.

Quote:

---

Originally Posted by alan b

ah so my 1.2 rad is the same as a gsi one? as it has the T.C nearer the bottom?

---

If its an early 1.2, yes. Later 1.2s had a different (smaller) rad. Easiest way to check is see if it has stilts on the bottom and position of the TC (bigger ones had them in the middle, smaller ones had them closer to the bottom)

Has anyone successfully run a TD rad in a petrol engine setup? i tried with my 20SEH but the inlet and outlet of the TD rad were back to front. It had pipework on it to adapt it, but it still never worked aswell as a normal GSI rad.

Mines a 1985 12ST. Would this be a early 12ST? If so, then I won't need a rad as it's the same size as a 1.6.