PDA

View Full Version : 91 nova sr for sale



dave955
12-06-08, 01:09 PM
right after much deliberation i have decided to sell my nova project

its a 1991 nova sr mostly in origanal order
its got 81 thou on the clock
the interior is imaculate condition no wear to the bolsters at all
engine is sweet apart from the exhaust is blowing from the manifold
out side it does need some work could do with wings doors and some repairs to the arches aswell as front valance/crossmember but does seem to be solid everywere else
i have sofar put ate astra 1.4 calipers and grooved discs on it + gsi front bumper and have gsi side skirts in the shed and have fitted full black dash

will make a good tidy car with a little work £300

http://i126.photobucket.com/albums/p90/dave955/nova/SL730217.jpg

http://i126.photobucket.com/albums/p90/dave955/nova/SL730215.jpg

http://i126.photobucket.com/albums/p90/dave955/nova/SL730216.jpg

http://i126.photobucket.com/albums/p90/dave955/nova/SL730214.jpg

http://i126.photobucket.com/albums/p90/dave955/nova/SL730221.jpg

http://i126.photobucket.com/albums/p90/dave955/nova/SL730220.jpg

http://i126.photobucket.com/albums/p90/dave955/nova/SL730213.jpg

http://i126.photobucket.com/albums/p90/dave955/nova/SL730209.jpg

http://i126.photobucket.com/albums/p90/dave955/nova/SL730211.jpg

http://i126.photobucket.com/albums/p90/dave955/nova/SL730198.jpg

belly257
12-06-08, 01:13 PM
any tax or mot?

dave955
12-06-08, 01:17 PM
no tax or mot mate it been of the road for 2 years as the one lady owner died unfortunatley its had two owners since then so its no longer a 1 owner from new :(

spear_
12-06-08, 02:23 PM
any change of some closer pics of the parts need repairing
cheers

dave955
12-06-08, 02:28 PM
no probs mate il get some pics up

dave955
12-06-08, 03:52 PM
pics of said areas
http://i126.photobucket.com/albums/p90/dave955/nova/SL730308.jpg

http://i126.photobucket.com/albums/p90/dave955/nova/SL730309.jpg

http://i126.photobucket.com/albums/p90/dave955/nova/SL730310.jpg

http://i126.photobucket.com/albums/p90/dave955/nova/SL730311.jpg

http://i126.photobucket.com/albums/p90/dave955/nova/SL730312.jpg

http://i126.photobucket.com/albums/p90/dave955/nova/SL730313.jpg

http://i126.photobucket.com/albums/p90/dave955/nova/SL730314.jpg

http://i126.photobucket.com/albums/p90/dave955/nova/SL730315.jpg

http://i126.photobucket.com/albums/p90/dave955/nova/SL730316.jpg

http://i126.photobucket.com/albums/p90/dave955/nova/SL730317.jpg

http://i126.photobucket.com/albums/p90/dave955/nova/SL730318.jpg

draper
12-06-08, 03:56 PM
boot floor, engine bay pics please - and rear chassis legs if possible

dave955
12-06-08, 03:59 PM
no probs

draper
12-06-08, 04:00 PM
and crossmember please

dave955
12-06-08, 04:12 PM
sorry nonly got 1 chassis leg as couldnt get pic of other although it feels good
http://i126.photobucket.com/albums/p90/dave955/nova/SL730328.jpg

http://i126.photobucket.com/albums/p90/dave955/nova/SL730329.jpg

http://i126.photobucket.com/albums/p90/dave955/nova/SL730330.jpg

http://i126.photobucket.com/albums/p90/dave955/nova/SL730327.jpg

http://i126.photobucket.com/albums/p90/dave955/nova/SL730326.jpg

http://i126.photobucket.com/albums/p90/dave955/nova/SL730325.jpg

http://i126.photobucket.com/albums/p90/dave955/nova/SL730324.jpg

http://i126.photobucket.com/albums/p90/dave955/nova/SL730323.jpg

http://i126.photobucket.com/albums/p90/dave955/nova/SL730322.jpg

http://i126.photobucket.com/albums/p90/dave955/nova/SL730321.jpg

http://i126.photobucket.com/albums/p90/dave955/nova/SL730320.jpg

dave955
12-06-08, 09:07 PM
bump

Graeme
12-06-08, 10:18 PM
No disrespect but I've got a sieve in my kitchen with less holes in it, thats gonna take some welding to pass an MOT.

dave955
12-06-08, 10:28 PM
it needs two patches under the bonnet one in boot wings/doors/work to rear quarters and a front valance to have a good origanal sr hardly a sieve but if for parts still worth £300

John
12-06-08, 10:32 PM
pm sent.

dave955
12-06-08, 10:37 PM
replied

draper
12-06-08, 11:16 PM
No disrespect but I've got a sieve in my kitchen with less holes in it, thats gonna take some welding to pass an MOT.


its not that bad, ive taxed worse tbh

if i had a way to get it back to mine id buy it

AlexW
13-06-08, 12:11 AM
No disrespect but I've got a sieve in my kitchen with less holes in it, thats gonna take some welding to pass an MOT.

As said by Draper, That is not bad at all! I would snap it up, But i dont think my wallet or misses would agree

NovaLad
13-06-08, 12:16 AM
Good luck with sale...

But if you break it can i have 1st dibs on splitter as i really want that type.

Thanks

dave955
13-06-08, 12:16 AM
it could be a very nice car and i wanted to do it but my vectra is my show car and that sucks all my money up

dave955
13-06-08, 12:17 AM
Good luck with sale...

But if you break it can i have 1st dibs on splitter as i really want that type.

Thanks

yes mate but tbh i dont think i will break it imo its to good for that if it doesnt sell it will be locked up in my nans garage for 12months until i can afford

TIDGE
14-06-08, 08:23 PM
if broken make sure you pm me as i want the front bumper

NovaBoi92
03-08-08, 12:34 PM
hahaha thats my car brought it last month just seen this thread :-D al the probs on it are being sorted out. new wings doors, whole exhaust system, rims, welding going to be done. got it garaged. cant drive it tho only 16 :)

Nobby
03-08-08, 02:06 PM
hahaha thats my car brought it last month just seen this thread :-D al the probs on it are being sorted out. new wings doors, whole exhaust system, rims, welding going to be done. got it garaged. cant drive it tho only 16 :)

:thumb:

7ova
03-08-08, 09:49 PM
well done mate and good luck :thumb:

NovaBoi92
04-08-08, 09:00 AM
thanks, lol i wa just looking through n i saw 91 nova sr for sale. ad a look and it was mine! haha, when i brought it there were a few problems. 1 was the bonnet cable, it snapped from the interior handle. and the previous owner (dave955 on here) tied a cable around the bonnet release catch so u just pull that and the bonnet opens. i wanted to get that fixedso one day i tried to open the bonnet, and the cable snapped while the bonnet was shut! i was gutted but eventuallu had to snap the grill and pull the bonnet release manually. got new cable now, but within 5 minutes of fixing that i started the engine and it was constantly idling at 6500rmp lol and with that exhaust blow at the manifold it sounded baaaad. got that sorted, the throttle cable neded to be adjusted it was juts near the throttle boddy? i think its called? well thats fine now. and honestly, within 1 minute of fixing that i stated the car to test it. rolled forward. pulled handbrake SNAP needed new cable. thats sorted now. so i can focus on the problems that i was gna do in the 1st place. i brought 2 new wings from a vauxhall spares down the road for £35 each. and off my mate i brought a passenger door de-locked. and off ebay last night i brought a drivers door. i have a new exhaust in my garage that needs to be fitted bechause the exhaust i had on there was completely rotten and blown. but having that blow at the manifold, didnt rly matter much. ive been w8ing on my m8 to get me a gsi manifold and downpipe for about a week, he foned me up yesterday and hopefully, im changing the whole manifold, downpipe and whole exhaust today. the welding that needed to be done, (see in those pics) that isnt a priority at the moment, but that will be sorted. and also, because its an SR its got that stupid vinyl running along the bottom of the doors. that needs to come off. and it runs along the door pillar so that needs to come off too. i might buy some tints. i need new alloys and tyres which im buying soon. new air filter needed, might get the original. hmm what else. . . lowerd maybe? tinted rear lights, oh need new front light aswell its got moss growing in it lol. it hadnt been on the road in 2 years. and as dave said in this post, it needs new valance. also called crossmember isnt it? im not sure. but that is like. . .pure rust, definately need new 1. oh and when i was trying to take the old wing off, there was 1 bolt i couldnt get off. if anybody can help me, underneath the off/side light there was a bolt that i couldnt get to, it was behind a long thick metal bar after u took front bumper off. dont no about that 1. but also i couldnt get the side repeater out, i was told on here that u have to disconncet it, its in the footwell by the A pillar is that right?

well the car is coming along. i just need to spray all the parts i have, fit them. then that wil b a maority of the work done. i really enjoy worknig it. now that ive left school i have loads of time, and i start college in september. im doing car mechanics of course :-) and if anybody has myspace add me!
www.myspace.com/NovaMike92 (http://www.myspace.com/NovaMike92)
nice 1 ;-)

thedjse
04-08-08, 09:48 AM
Sounds good buddy Dave bought this as i was thinking of buying it its looked good when i was into it and again when he was selling it Daves an awsome guy and a good person to buy a car off good luck with the rest buddy

NovaBoi92
04-08-08, 10:03 AM
thanks, yeah hes rly nice guy. i like his vectra its sick car it was in total vauxhall if u ever saw it

thedjse
04-08-08, 10:24 AM
Yeah i know it very well lol

Its no more now tho

Hes broke it for spares or repairs as it was too modified to drive hes got a cally now mate

check www.c-vox.com (http://www.c-vox.com) hes on there buddy with all the progress of it lol

NovaBoi92
07-08-08, 12:05 PM
new exhaust on the nova, and manifold and downpipe. the cars in bits at the moment, took the whole front off. replacing valance soon coz its all rusted. then fitting the new wings. all coming along nicely :D new drivers door got delivered yesterday aswell. just gota spray al the new parts i have.