PDA

View Full Version : 1.3SR shell, R1carbs, alloys, heads, forged pistons, cams, & loads more



chappers1.3
11-06-08, 04:06 PM
Hi all....

After a good hard think.... i am selling up, and changing my plans... shame as i love my little nova, but need space to finish this new 300bhp wide arch turbo beast i bought.. lol

All parts are for sale, shell, wheels, everything is 4 sale. if you want lots of it, please ring and we'll discuss.. postage is additional, heavier parts are collection only.
All part are 4 the 2ltr 8v engine unless stated otherwise.

R1 carbs rejetted with 175 Main jets, rubbers, fuel pump - SOLD

18e Head, valves cleaned, reseated, face skimmed (with everything i have done to make an inlet manifold to suit R1 carbs, port matched face plate, turned ends to suit carbs 40-37mm taper, angled runners, not much work left to do filing wise, then it needs welding and you have yourself 180quid manifold! shame to thro work i have done. see this thread http://www.migweb.co.uk/forums/proje...ike-carbs.html for details - I have nearly done the outer 2 runners now) - £65

C20ne Head, standard and complete - SOLD
C20XE forged Mahle Pistons and balanced rods, pins with ARP rod bolts - £65 SOLD
2 x c20SEH/C20ne inlet manifolds - complete with injectors rail wiring, throttle body, sensors etc - £15
1.8 twin stage throttle body, (bigger than the c20ne throttle body) - £10
18e camshaft... 297 duration and higher lift - £20
unknown camshaft, fits Engine but dont have any info, in housing with red pulley - offers
3 rocker covers, (1is the 18E recoer cover) painted - £5
Cav Mk2 mechanical dizzy, cap, coil and cam housing to suit - SOLD
Irmischer Chipped ECU (2rows of pins) for C20ne - £50
C20SEH ECU - £15
4-2-1 Manifold, needs bit of pipe welding to exhaust depending on car/system going on. £40
2 x standard exhaust manifolds - free
2 x sumps - £10 1 SOLD
F16 box 90k approx - £15
C20ne ballanced crank, and pistons/rods in block, with all new bearings and bolts never run, water pump, bottom pulley - SOLD
Lightened flywheel - SOLD
Black Diamond Power Clutch - BRAND NEW but no box - £75
Starter motors, alternators, etc... £ask
Lightweight alumunium alternator belt pulley - SOLD
18e bottom end.. complete inc sump... – free
2ltr conversion driveshafts, need CV boots replacing - SOLD
Brand New Aluminium Radiator and Fan – Never fitted - £45
Rally 2” Exhaust pipe, 1 centre box, and 3” back box - £60
Nova GTE cam, box, cover - free
Nova GTE airbox and airflow meter - free
2ltr engine, gearbox mount set - SOLD

1.3SR Shell in flame red, SR doors, GTE Boot, Bumpers, grill, spare bonnet and 1.3 boot, fully stripped out bar dash, OMP 6-point roll cage with door bars, welded in place, fuel tank, rear beam n brakes, 40mm spax springs welded front end, full set of tinted glass (doors glass need fitting), needs windscreen replacing but in place. rust on the drivers rear arch, viewing is preferable and will need to be trailered – please ring me to discuss lots to list. Has been garaged for the last 3years - £500 ono SOLD

PI height and camber adjustable front suspension, with adjustors SOLD
Rear Billstein shocks - SOLD
Front OMP strut brace - SOLD
Full Yellow Poly Bush Kit (wishbones, rear beam, tie bars) – ideally would like to sell with shell as fitted front tie bar bushes and will need to go with car. - SOLD
48 groove disks, 16v callipers, no pads - SOLD
Sports D-shape steering wheel and boss - SOLD
2 x Cobra blue bucket seats – some burns to bases - SOLD

Full set of tinted windows for a NOVA 3dr, good condition - £50

4 x 15” team dynamics wheels in white with tyres, could do with a refurb but still ok and don’t loose any pressure EBAY
4 x Astra GSI alloys and tyres - £70
4 x 16" KOSEI alloys.... SOLD

Prob missed lots of other things, ring me/pm requests…..

Thanks Guys…..07921221800

thedjse
11-06-08, 04:14 PM
4 x 15” team dynamics wheels in white with tyres, could do with a refurb but still ok and don’t loose any pressure - £80


Pics please

KSRY
11-06-08, 04:16 PM
Are the Astra GSi alloys the fan type? are the tyres good? May know a chap interested

badassnow
11-06-08, 04:32 PM
r1 carbs fuel pump and dizzy pics please

chappers1.3
11-06-08, 05:56 PM
will get some pics of the wheels and carbs up tomorrow.
Or view this thread on Migweb and there are 2 pics on there.

http://www.migweb.co.uk/forums/projects-restorations/360480-building-your-own-inlet-manifold-r1-bike-carbs.html

And yes, the ASTRA GSI alloys are the fan type. tyres have 4mm on 2 and 2mm on the other 2, think they are Falken Tyres.

Buy the way, if any1 wants the Head, carbs, and work ive done on the inlet manifold, offers are welcome... lol lol lol

garethcolley
11-06-08, 06:05 PM
Pics of GSi and team dynamics wheels to garethcolley@hotmail.com

Dicko's
11-06-08, 06:49 PM
tried to send pm mate but inbox full

JJL
11-06-08, 07:18 PM
Intersted in the carbs, driveshafts, f16 and dizzy were abouts in preston are you pall?

big gra
11-06-08, 08:24 PM
sent a txt but no reply!!

draper
11-06-08, 08:27 PM
pics of seats please, and would you sonsider splitting the wheels/tyres ??

chappers1.3
11-06-08, 11:18 PM
sorry taken a while to respond been out all evening.

Carbs & dizzy setup provisionally sold to Badassnow, and driveshafts are prob sold to Prey.

Will not split wheels from tyres, sold complete and in full sets. Pictures will be loaded up tomorrow of all items requested.

Replied to all texts now. Sorry 4 delays. Inbox is now clear so if you want to PM feel free.

JJL - PM sent mate.

chappers1.3
12-06-08, 07:16 PM
Seats. Need a clean but ok.
http://i306.photobucket.com/albums/nn254/chaps1985/DSCN1220.jpg

http://i306.photobucket.com/albums/nn254/chaps1985/DSCN1221.jpg

http://i306.photobucket.com/albums/nn254/chaps1985/DSCN1222.jpg

Team Dynamics

http://i306.photobucket.com/albums/nn254/chaps1985/DSCN1218.jpg

this is the worst 1, they all have scuff marks but none are that bad.
2 with Nankang Tyres ~ 4mm , 2 are jsut cheapy 1s that need replacing soon.

http://i306.photobucket.com/albums/nn254/chaps1985/DSCN1219.jpg


Astra GSI rims.

Can only get this pic at the moment, as they stored.
http://i306.photobucket.com/albums/nn254/chaps1985/DSCN1224.jpg



Carbs n Dizzy sold, Driveshafts sold, Steering wheel n boss sold.

chappers1.3
13-06-08, 01:08 PM
Hi every1. Being messed about with these carbs / Dizzy setup, so decided to stick them on ebay in a No Reserve Auction.

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=110261852015&ssPageName=ADME:L:LCA:GB:1123 (http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=110261852015&ssPageName=ADME:L:LCA:GB:1123)

also i have listed the Coilovers, rear suspension, and a strut brace i 4got i had under this. again no reserve.

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=110261865765


If there isnt much interest soon i'll be listing the rest on also.

THanks

Thanks

draper
13-06-08, 02:13 PM
could you post the seats ?? or wrap them and ill arrange a courier to collect ?

chappers1.3
13-06-08, 02:27 PM
draper: PM'd mate about the seats.

Rickyb
13-06-08, 03:43 PM
have you still got the 2ltr engine, gearbox mount set and what about the conversion driveshaft set will come today for them cheers oh pics :thumb:

Shaun
13-06-08, 03:48 PM
how much to end dizzy setup and carbs mate please

Rickyb
13-06-08, 07:04 PM
have you still got the 2ltr engine, gearbox mount set and what about the conversion driveshaft set will come today for them cheers oh pics :thumb:

i can come tonyt reali could do with these

chappers1.3
13-06-08, 08:05 PM
I have jsut sold the Driveshafts and the engine mounts.
And the carbs - Corsagsi16vplym.... you had ur chance lol, and u said u'd leave em?!

auction is gonna run till the end.

Cheers.

Jamienova
13-06-08, 09:01 PM
hi mate interested in the forged pistons,rods,bolts etc have you got any pics? how many miles have been ran on them aswell?

chappers1.3
14-06-08, 12:00 AM
dont know how many miles the pistons rods have done but they are in good condition. i bought them a few months ago to use in my project so never have used them in my engine. Will need piston rings, and gudgeon pin clips.

http://i306.photobucket.com/albums/nn254/chaps1985/DSCN1250.jpg

http://i306.photobucket.com/albums/nn254/chaps1985/DSCN1254.jpg

cheers:thumb:

Shaun
14-06-08, 04:20 PM
I have jsut sold the Driveshafts and the engine mounts.
And the carbs - Corsagsi16vplym.... you had ur chance lol, and u said u'd leave em?!

auction is gonna run till the end.

Cheers.

cause i thought badassnow had bought them from u and was confused.
will bid then

Dicko's
14-06-08, 08:26 PM
empty your pm box again mate lol

regarding seats

draper
15-06-08, 04:21 PM
PM box is full fella

chappers1.3
16-06-08, 10:03 AM
Inbox emptied again!
Cheers

chappers1.3
16-06-08, 04:06 PM
Seats are sold.

white2lSR
16-06-08, 06:05 PM
are the pistons standard size?

chappers1.3
18-06-08, 12:55 AM
are the pistons standard size?

yes the pistons are the standard XE ones. But they are the forged versions from the earlier engines.

dj_wudgey
18-06-08, 09:55 AM
have you still got the shell mate

Rickyb
18-06-08, 05:48 PM
if youve still got the pistons at weekend il have them :thumb:

twistysnovagte
18-06-08, 06:44 PM
id be interested in these,and can collect no probs,are they all in good working order:thumb:
Nova GTE cam, box, cover - free
Nova GTE airbox and airflow meter - free

chappers1.3
19-06-08, 10:12 AM
I have no idea tbh if it works, i broke a car AGES ago and these were some bits i had left. It all needs a clean up, but looks ok to me.
I also have 1.6 vernier pulley that is the same size as the GTE pulley. u can take for £25. its not a piper one or anything fancy but its an adjustable pulley never the less.... Works on a dowel and different spaced holes to change degrees...

Also, i should have Nova GTE front and back bumpers in Red, and a Red GTE boot thats nearly in perfect condition there is only 1 small rust spec.. £offers.

http://i306.photobucket.com/albums/nn254/chaps1985/Image013.jpg

Also, A full set of Tinted windows... £60

cheers

draper
19-06-08, 10:18 AM
pics of front and rear bumpers aswell matey please, has the rear been cut for an exhaust at all ??

chappers1.3
19-06-08, 11:00 AM
Will get some pics hopefully this evening, internet is playing up at home tho so may be in morning unless i get to a PC somewhere else.
Back bumper is standard as far as i can tell, apart from the cut out in the center.

chappers1.3
19-06-08, 11:03 AM
Also: Sorry to those watching the carbs n dizzy on ebay. they were removed as were sold to a private buyer for a very reasonable price... I got more than advertised on here put it that way, so could not refuse...

Cash is cash lol.... and my MBE management needs setting up properly......

chappers1.3
19-06-08, 10:42 PM
some more pics of the parts left over.
Exhaust system

http://i306.photobucket.com/albums/nn254/chaps1985/DSCN1263.jpg

4 branch manifold
http://i306.photobucket.com/albums/nn254/chaps1985/DSCN1264.jpg

Black diamond Clutch - NEW
http://i306.photobucket.com/albums/nn254/chaps1985/DSCN1272.jpg

Front GTE bumper
http://i306.photobucket.com/albums/nn254/chaps1985/DSCN1274.jpg

Back bumper and boot
http://i306.photobucket.com/albums/nn254/chaps1985/DSCN1275.jpg

More alloys - 16" Kosei multistud alloys - 3x yokos with 3mm tread, 1 will need replacing - ON EBAY http://cgi.ebay.co.uk/16-kosei-black...QQcmdZViewItem (http://cgi.ebay.co.uk/16-kosei-black-silver-alloys-multifit-multistud_W0QQitemZ110263627270QQihZ001QQcategoryZ 9888QQssPageNameZWDVWQQrdZ1QQcmdZViewItem)
http://i306.photobucket.com/albums/nn254/chaps1985/DSCN1280.jpg

GTE vernier pulley
http://i306.photobucket.com/albums/nn254/chaps1985/DSCN1283.jpg

Aluminium Radiator with fan... NEW
http://i306.photobucket.com/albums/nn254/chaps1985/DSCN1249.jpg
__________________

chappers1.3
19-06-08, 11:35 PM
Irmscher ECU.
http://i306.photobucket.com/albums/nn254/chaps1985/DSCN1646.jpg

Rickyb
20-06-08, 09:51 PM
is the exhaust for a 2ltr 8v if so how much for the lot?

chappers1.3
21-06-08, 01:37 PM
yeah the exhaust is for the 2ltr 8v. i'll do you the manifold and the system for £90. you will need to get a flexi adaptor for the section between the manifold and the exhaust pipe as its not got an adaptor. or weld a bit of pipe in?
wont be on the internet 4 rest of today, so if u r wanting to collect today, give me a ring on 07921221800.
cheers

chappers1.3
23-06-08, 03:35 PM
Full set of Tinted Glass for sale,
this include:
Boot, Back windows, Front windows, Front Triangle windows.

good condition prob about 40% tint - collection only - £50

Thanks.

draper
23-06-08, 06:30 PM
how much for the front bumper ??

chappers1.3
24-06-08, 02:59 PM
£25 + P&P. dont know how much it will be to send, its too big for my normal courier service so i'll have to get a quote.
P.s. Draper: Your seats are boxed n ready 4 collection tomoz.
cheers :thumb: