View Full Version : Starting problems
cdb gsi
03-06-08, 12:40 AM
When i start my xe it fires up but keep on doin the turnin over noise and wen i take the keys out engine stops but the turnin over noise still carrys on,i hav to disconnect the battery to stop it,anyone no what the problem can b
leenovagsi
03-06-08, 02:04 AM
from wat u say it sounds like your starter motor is sticking
Or could be a faulty ignition switch
I'd go with the ingnition switch. Does the dash stay lit up?
meritlover
03-06-08, 11:55 AM
could be as mentioned a sticky starter or sticky solenoid, or a wiring fault between the outgoing side of the contactor to the solenoid coil trigger wire. for instance the starter is off and the solenoid is de-energised, when energised (key turned), the Pre-engage contacts make in the solenoid and the out going wire (to the motor) is supplying current to the solenoid trigger and therefor latching on until the battery is disconnected.
just a thought.
Meritlover (loves Merits)
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.