View Full Version : GSI items wanted
tom_bish
29-05-08, 08:24 AM
Hi all i need the following to finish off my nova project
GSI Starter loom
GSI Plastic pipe that bolts onto rear of the engine plus hose to fit to water pump housing
GSI Distributor
GSI Coil
GSI Airbox
GSI Induction pipe to fit from AFM to inlet
GSI Gear linkage
That's all i can think of for now, any help would be much appreciated
Tom
tom_bish
30-05-08, 10:53 AM
anyone breaking a GSI??
GSI Starter loom: Arent these the same as any other Nova?
GSI Plastic pipe that bolts onto rear of the engine plus hose to fit to water pump housing: again, the same as most small block engines
GSI Distributor: As above, iirc SRi ones are the same
GSI Coil: As above, iirc SRi ones are the same
GSI Airbox: K&N?
GSI Induction pipe to fit from AFM to inlet: Mix and match mate
GSI Gear linkage: Same as all 5 speed models
Hope this helps you out mate.
tom_bish
30-05-08, 12:26 PM
Ok they might be the same as other models but i still need the parts. I've checked local scrap yards but there are no novas there atm
I've sourced a standard airbox and coil
I have a plastic pipe i think it came from my SRI engine but it won't seem to fit the GSI block??
Are there the same amount of outlets? Have you examined how the Pipe attatches to the block/gearbox?
Some MPi Astras used very similar parts, that may help.
tom_bish
30-05-08, 01:21 PM
Yea there's 2 tabs with holes in on the plastic pipe to fit to the block but these don't line up with the holes on the block.
tom_bish
02-06-08, 12:11 PM
bump
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.