ben doodar
13-05-08, 10:07 PM
Hello to you. Ive been strugling to get a spark on my 2ltr conversion, for a while now. Its had the cavalier engine loom fitted along with the engine.
everything is earthed correctly, it has the switch live along with the permanent live, everythings there, and its all been fitted correctly. new fuel pump relay (all though i doubt this would affect it) new crank sensor, plugs, leads, dizzy cap and arm. still no spark! if you take the main ht lead from the coil and test with a multi meter turn the ignition on and it gets 12v, connect it to a spark plug crank the engine over, still no spark!
what do you think the best thing to try next is? any other sugestions?
everything is earthed correctly, it has the switch live along with the permanent live, everythings there, and its all been fitted correctly. new fuel pump relay (all though i doubt this would affect it) new crank sensor, plugs, leads, dizzy cap and arm. still no spark! if you take the main ht lead from the coil and test with a multi meter turn the ignition on and it gets 12v, connect it to a spark plug crank the engine over, still no spark!
what do you think the best thing to try next is? any other sugestions?