PDA

View Full Version : some wiring help please lol



peester
24-04-08, 08:48 PM
intermittant wiper doesnt work properly, i did find disconnected wires, but reconnected them - still playing silly.. it tries to click on/off but all timed badly,..stops in the middle of the screen..
anyone know what colour wires the fog lamp is; at the switch??
finally what is involoved in wiring up the handbrake dash light? surely its not just hooking up the brown/white trace..?

thanks

peester
26-04-08, 12:08 PM
:(

Adam
26-04-08, 07:11 PM
Handbrake is just brown/white, which then gets put to earth with a pin switch

Hmm, wipers, maybe the intermittent relays fooked?

Feed to foglamp is black/blue according to haynes.

peester
26-04-08, 08:43 PM
ok, the issue with the handbrake wire is it wont illuminate the on the digi dash instrument panel..ive connected the wire up like guides say (although ones mentions to connect the brake fluid one up together with handbrake ?) and no light, bulb seems ok..

wipers- i think its relay too - its clicking crazy.. looks like a yellow/black wire is for intermittant..

foglamp - ill check it out, test n connect ta..

Adam
26-04-08, 08:53 PM
Aye, i wired both my handbrake and brake fluid together.
Remove the plug from the brake fluid res, and bridge the wires see if it lights up then

peester
26-04-08, 10:26 PM
ok.. try that, bridging red/brown with brown?? that not a live and earth?

Adam
26-04-08, 10:30 PM
Nope its not a live an earth.
The brown is constantly earth, the level float then bridges the wires to send the brown/red to earth... Bringing the light on :)