camber adjusting bolts

[brucer]

just brought a set for my gte which has been lowered 40mm.

does anybody know the figures they should be set to and has anybody used them before?

any help would be good.

bruce.

[Adam*D]

Don't see why you need them TBH, mines lowered about 80mm and I don't need em?

[Stuart]

as a rough guide, every 10mm drop increases neggy camber by approx 1mm (at the strut top)... meaning it will eat tyres, and handle weirdly

[tom_beverley]

Fit them and set by eye, then take your car to get tracked at a laser wheel alignment place and get the garage/or yourself to have a play and set to between 1-2 degrees negative camber IIRC.

Maybe ask if you can go for a little drive to check what it drives like and hop back on if your not happy.

[alan b]

which ones you get mate? courtney ones? or demon tweeks?

[brucer]

which ones you get mate? courtney ones? or demon tweeks?

i brought them off ebay.not too sure if ill regret that along the line but theres a few sets on there.

thanks for all the help.we do have a camber scale type dude at work but it bolts to steel wheels.mite try to see if a 14inch steel fits over my brakes if not ill have a shot at guess work.lol.

thanks alot.:thumb:

[big gra]

well for my old nova, it was lowered 60mm and the camber was horrible, moved the tops of the strut over 40mm and it was fine, but it should be moved 1mm for every 10mm lowered iirc.