View Full Version : can you put a nova mk2 dash in a mk 1 nova and get it all to fit
Nova.Racing
19-04-08, 07:37 PM
can you put a nova mk2 dash in a mk 1 nova and get it all to fit if so can sum one tell me how to do it thanks jake:thumb:
can Any one tell wot plugs will need 2 be changed
novacabrio
19-04-08, 07:38 PM
dead easy
Just make sure you get all the plugs off the mk2 loom.
Mounts are all the same, but some of the wiring is different - hence needing the plugs for the Mk2 loom.
Nova.Racing
19-04-08, 08:54 PM
Thanks pepz can Any one tell wot plugs will need 2 be changed thanks
Them all if i remember correctly and i think you need the heater matrix as well but dont quote me on that.
Mk1 heater matrix will fit, although if you have a poverty spec one you'll need to chop the bits out for the side vents if you want those to work.
As for wires, I think the headlamp foglamp switches need the wires moving round, but are like for like on colour. The hazard switch needs rewiring though, the wire colours change on that one - take a look in Haynes for wiring diagrams.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.