2008 pvs challenge build

[big gra]

got my new nova this week, its a 1.2spi in white, allready got the engine out and started prepping to weld up the cancer it has. this car was sat in my mates drive for about a year, i have been pinching parts off it ever since, but wanted a project so rescued it. car came with a 1.6gte eingine in the boot in pieces so needs to be rebuilt and installed.

[big gra]

got lots done yesterday with the help of sr-lew. got the welding done in the engine bay an lots primed. also got all the gaskets an parts to re-built the engine. there were 3 bits of weldig, one bit needed three patches because it had gone were 3 panels meet, see pics.

the cancer

http://i57.photobucket.com/albums/g201/biggra/100_1259.jpg

the surgery

http://i57.photobucket.com/albums/g201/biggra/100_1265.jpg

cured

http://i57.photobucket.com/albums/g201/biggra/100_1267.jpg

[big gra]

http://i57.photobucket.com/albums/g201/biggra/100_1260.jpg

http://i57.photobucket.com/albums/g201/biggra/100_1266.jpg

[big gra]

all new bits for the engine

http://i57.photobucket.com/albums/g201/biggra/100_1269.jpg

the engine

http://i57.photobucket.com/albums/g201/biggra/100_1270.jpg

engine parts, and skimmed and re-built head, on a meke-shift bench

http://i57.photobucket.com/albums/g201/biggra/100_1263.jpg

[big gra]

just finished spraying engine bay white, looks ok, but needs an engine, haha. still need to get hold of a passenger door, wings, bumpers, lights etc

[twistysnovagte]

might be worth seem welding the bay(while you can) for a xe there cheap enough at the minuate!

[big gra]

might be worth seem welding the bay(while you can) for a xe there cheap enough at the minuate!

im not a fan of xe's to be honest, everyone around my area that has had one done has had it gone wrong, my last gte engined nova ran like a dream even with 130000 on the clock and no rebuild, so im hoping this one will be even better.

[big gra]

started cleaning up and painting engine today, need to get hold of a clutch kit and the gearbox can be put back on.

[SRlew]

good, get cracking and chuck it in

[big gra]

engine is now in one piece, just waiting to pick the clutch kit up 2mz and the engine will be ready to go in.

[big gra]

just got new clutch and release bearing, and put the gearbox back on. engine might be going in this afternoon.

[big gra]

engine is in one piece and is now in the car with the gearbox, struggling to get pics atm though so will get soem as quick as i can.

still need:

passenger door

alloys

lowering kit

mpi fuel pump

gte gsi skirts

[big gra]

just to let you people know its 1:45am and im still working on my nova, just having a little break, gonna run to tesco for food.

[CoolTiger]

just to let you people know its 1:45am and im still working on my nova, just having a little break, gonna run to tesco for food.

lol dedication :):thumb: keep up the good work

[big gra]

lol dedication :):thumb: keep up the good work

haha nice 1, i want it running erm well today, so can start the body work, got to the wiring and im a bit stumped. :confused:

[SRlew]

how you get on last night with the wiring gra?

[P Whack]

U wont have it running today well hopefully not! so i will win the challenge looking good man!

[L33 LEG]

sounds like its coming on well, good luck for pvs.

and im the same with working at daft hours, i used to stay up until 3/4am just messing with my cars lol. best time tbh...

get some pics up!

[Mike B GTE]

/\ agreed, used to come in from nights and do a couple of hours in the garage before bed. no distractions :thumb:

lets see some piccies!!!

[big gra]

small update, most of the wiring is in now, engine turns over on the key, just need to try and sort through the ignition wiring.

still no camera though, usually use my phone but its away being fixed.

[big gra]

ok, engine starts, just about, but i still need an mpi fuel pump to get it running properly, and an accelerator cable.

[Rickyb]

any updates on this mate and wen you got that engine was it missing sump bolts? im sure thats my old engine that i sold to RYAN5cyl

[big gra]

any updates on this mate and wen you got that engine was it missing sump bolts? im sure thats my old engine that i sold to RYAN5cyl

yea it was missing sump bolts, and im missing some engine bits aswel, you havent got the accelerator cable have ya?

[Rickyb]

no mate i left it in the car which got scraped sorry mate. wen i sold it ryan it had a fuel pump with it which ran it. good work mate. oh an is there any updates?

[big gra]

well its almost running, need a mpi intank fuel pump, wings, bumpers etc to finish

[Rickyb]

ok well il have a root around and see what bits ive got n gie you a shout mate

[big gra]

chhers man, im missing bits that went on the inlet manifold for the air breathers

[big gra]

bought a set of wheels off ebay, new 195/45/15 tyres, in primer ready to paint. think im doing them gloss black. :thumb:

http://i57.photobucket.com/albums/g201/biggra/wheels.jpg

[big gra]

sorry about the lack of pics, get my phone bak 2mz so will be sorted.

been to scrappy 2day, got fuel pump and throttle cable off a gsi astra so engine now runs but is still lupy, timing is bit off.

[big gra]

aay got my phone back today so i can start flooding this thread with pics.

engine in
http://i57.photobucket.com/albums/g201/biggra/30042007001.jpg

http://i57.photobucket.com/albums/g201/biggra/30042007003.jpg

exhaust chopped and new exhaust ready to match up to the gsi downpipe
http://i57.photobucket.com/albums/g201/biggra/30042007002.jpg

[big gra]

another late night report from the garage, this is how it looks now, not so much progress, as de-progress, engine still running lumpy and not idling, so head is now off, and found to be injector problems, i hope :roll:

i have been to scrappy and got bumpers, lights, few odd bits, just needs wings, grill and lowering kit.

http://i57.photobucket.com/albums/g201/biggra/02052008016-1.jpg

[craig green]

Let me know if you need a set of injectors.

Maybe try priming the pump with 12v & see how far fuel sprays out the fuel line up front. If its 20 feet accross the garage then pressure is good, if it doesnt shoot fuel very far it could be dicky fuel supply.

Was the injector plug definately plugged in properly? Loom earthed onto the inlet (or wherever it is) correctly?

[big gra]

Let me know if you need a set of injectors.

Maybe try priming the pump with 12v & see how far fuel sprays out the fuel line up front. If its 20 feet accross the garage then pressure is good, if it doesnt shoot fuel very far it could be dicky fuel supply.

Was the injector plug definately plugged in properly? Loom earthed onto the inlet (or wherever it is) correctly?

yep, everything was earthed, i put a bulb in each of the injector plugs and it went bright each time, checked timing numerous times. think im gonna end up selling it on ebay as a non running project, ive no more money to spend on it at all, the engines cost 3 times what i expected it to.

[CP]

Bad luck mate:(

[big gra]

its alive!!!!!!!!!!

picked my new nova up tonight, out of curiosity i swapped the dizzys over and it fired right up. has now been taken off ebay, the engine will be taken out and put in my new nova which allready has a 1.6spi astra engine. will get pics in the morning. :thumb:

[Rickyb]

congatulations mate:thumb: i had a look threw all the bits i had in my unit bit i couldnt find anythink off that engine. out of pure nosieness what are you doing with the white 1?

[Dave.]

is your new nova.. a blue 2dr from sthelens by any chance..?

[big gra]

congatulations mate:thumb: i had a look threw all the bits i had in my unit bit i couldnt find anythink off that engine. out of pure nosieness what are you doing with the white 1?

the white shell is now on ebay mate.

[big gra]

is your new nova.. a blue 2dr from sthelens by any chance..?

yea dave i bought it from twistysnovagte's friend yesterday.

[Rickyb]

how much to buy it now mate

[big gra]

right well here is the new nova, needs "de-chaving", ie front bumper, alloys will be removed, have standard mk2 bumpers, need to find a good front splitter though, have got my wheels in primer ready for painting, not sure black or white yet though! the 1.6spi engine will be swapped for the 1.6gte engine out of my white one.

new car, needs ront bumper removing and standard one putting on. atm it is lowered 40mm front and rear is standard, going to fit the 40mm rears and see what it sits like with my 16's on.

http://i57.photobucket.com/albums/g201/biggra/06052008012.jpg

rear bumper is going to be changed for standard black one

http://i57.photobucket.com/albums/g201/biggra/06052008011.jpg

bargain of the century off ebay, tsw alloys in primer with brand new 165/45/16 tyres, wrongly advertised on ebay, got them for £105, not sure weather to go fro white of gloss black.

http://i57.photobucket.com/albums/g201/biggra/06052008010.jpg

standard mk2 bumpers going to be sprayed matt black

http://i57.photobucket.com/albums/g201/biggra/06052008009.jpg

side skirts also going matt black

http://i57.photobucket.com/albums/g201/biggra/06052008018.jpg

astra 1.6spi engine to be removed

http://i57.photobucket.com/albums/g201/biggra/06052008017.jpg

looks like maximes has taken over the boot, all that will be going, no extra weight needed.

http://i57.photobucket.com/albums/g201/biggra/06052008019.jpg

[Rickyb]

sounds like a good project :thumb:

[big gra]

right well going away tonight, be back monday morning and the engine swap can commence.

[craig green]

White wheels!

[Ryan5cyl]

Thats what I told him, he needs to see a blue Nova with white wheels to convince him ;)

[BEN187NOVA]

i got 4 weeks to sort my cage wheels and get my let running right ? oh yer and get bonnet pianted .....****ting it

[big gra]

wahey, back from my weekend away now. progress will start at dinnertime today when both engines are coming out!!

[big gra]

todays progress started with removing the gte engine from the old white shell, with the use of the universal engine removal tool, everyone should have one (forklift :thumb:)

http://i57.photobucket.com/albums/g201/biggra/11052008033.jpg

http://i57.photobucket.com/albums/g201/biggra/11052008034.jpg

http://i57.photobucket.com/albums/g201/biggra/11052008035.jpg

then the removal of the astra 1.6spi engine from the new nova. went out for a last drive and clutch went and spewed all of its gearbox oil all over my mates drive, so good gob i planned on changing the engine.

http://i57.photobucket.com/albums/g201/biggra/11052008036.jpg

http://i57.photobucket.com/albums/g201/biggra/11052008038.jpg

http://i57.photobucket.com/albums/g201/biggra/11052008040.jpg

http://i57.photobucket.com/albums/g201/biggra/11052008037.jpg

going to get the engine bay cleaned up and sprayed tomorrow hopefully.

[big gra]

forgot to add, the old white shell and astra engine went away to a new home to start a long term project, was top guy who took it aswel.

http://i57.photobucket.com/albums/g201/biggra/11052008041.jpg

[Riggy]

did you leave the softstars on the white one lol

[Rexy]

jesus not another white one with softstars....

I'll get lew to bring us over when we go riding in southport again...I wana nosey at the nova beast :D

[big gra]

yea, they wer only 14" softstars though, only had one good tyre, couldent find a full set of steelies without fooked tyres.

[big gra]

does anyone know what colour blue that nova is? went to local car shop today and couldent decide what shade of blue it was!

[Rexy]

there should be a colour code on the front slam panel mate, there is a paint list on the site somewhere...

Whalal :D

[big gra]

not much to report today,. did a bit of cleaning an dpriming in the bay, bought the paint ready to spray tomorrow.

http://i57.photobucket.com/albums/g201/biggra/13052008048.jpg

[big gra]

bay is spraye dup, and engine is under the car ready to be lifter into place, just need something to lift it with, the fork lift isnt available atm. hhmm...

[big gra]

well with a lot off struggling, and a lot of small jackings, the engine is now in. bit dark but you get the gist of it.

http://i57.photobucket.com/albums/g201/biggra/14052008062.jpg

[nuno_gt]

Nice project m8.

Keep up the work and keep posting photos of that.

[twistysnovagte]

what you mean by "de-chaving" graham, as youre probaly aware the front end was built due to ????,.wheels was also put on just to liven it from the steels.and therefore take this as an insult purely because i put the car up for sale on here for a friend(who also doesnt like being called a chav):(

[big gra]

what you mean by "de-chaving" graham, as youre probaly aware the front end was built due to ????,.wheels was also put on just to liven it from the steels.and therefore take this as an insult purely because i put the car up for sale on here for a friend(who also doesnt like being called a chav):(

bloody hell, calm down. in my opinion anything apart from standard nova bumpers are body kits, especially front bumpers like that, dont suite the car at all. :wtf:

[big gra]

as youre probaly aware the front end was built due to ????

what you mean by that part?

[Rickyb]

good work mate

[twistysnovagte]

what you mean by that part?its had a full front end rebuild valance etc due to RUST, which wasnt to bad but was done anyhows when the spi engine went in,what im getting at gray is the fact you say it as tho were a couple of boy racer chavs,the car wasnt my cup of tea either,will be nice to see a final result of your project, as im keeping tabs on youir progress:)

[big gra]

today is hopefully the day. got it on its wheels last night, not happy with the ride height at all though. needs exhaust and lug leads and should be away. fingers crossed.

[SRlew]

another car gra i carnt keep up. looks an alright one tho

[big gra]

well, its running but still missfiring, took it for a little drive to try and settle the suspension but needs some lower springs on the back at least. wheels arent finished, just put them on to drive it out.

http://i57.photobucket.com/albums/g201/biggra/18052008072.jpg

http://i57.photobucket.com/albums/g201/biggra/18052008071.jpg

http://i57.photobucket.com/albums/g201/biggra/18052008073.jpg

[big gra]

woo hoo, its alive and kicking. sorted all the fuel and timing problems out (hopefully), heres a vid.

http://www.youtube.com/watch?v=g67UT57GmyA

[P Whack]

Get that gay peco of it!!

[big gra]

Get that gay peco of it!!

nah man, i wasnt sure about it, but drove it up the road then and it sounds just right. :) been a lot of hassle bud made it in the end!

[big gra]

quickly put the bumpers and grille back on and took it to the end of our farm road for some pics. waiting for my splitter and then going to spray the bumpers and skirts black, and finish the wheels. youve gotta use your imagination a bit. :thumb:

defo needs lowering more on the back. (oh and couldent close my bonnet because ive lent the cable clamp to pwhach for his MOT)

http://i57.photobucket.com/albums/g201/biggra/18052008075.jpg

http://i57.photobucket.com/albums/g201/biggra/18052008076.jpg

[nuno_gt]

Good to hear about the developments of this project.

At the rear you may need to enlarge a bit because of the scrubbing of the wheels in the metal.

Keep up the good work, m8

cheers

[big gra]

im contemplating on weather to keep the 16"s, or get some 15"s and lower it more. the 16"s its got now will be fine on the rear, but will be close with a 60mm drop unless they were on coilovers.

[Ryan5cyl]

Good progress Graham, you'll have to take me out in it when its sorted, wheels look similar to Craigs 17's, Nice work! :thumb:

http://i34.photobucket.com/albums/d123/Ryan5cyl/Cars/My%20Nova/02062007161.jpg

[big gra]

yea they do dont they. if i keep the wheels, going to do them black, not so keen on the white.

[big gra]

got a preasant in the psot today, all teh guys at the post depot were playing around with it thinking it was a bow and arrow, haha,, nope my new laguna splitter :thumb: courtesy of adam!

it did have a bit of tape going from each end to stop it bending, the postman thought that was to cover up the string on the bow, haah.

http://i57.photobucket.com/albums/g201/biggra/19052008077.jpg

http://i57.photobucket.com/albums/g201/biggra/19052008078.jpg

[Rickyb]

looks sweet mate glad you got it goin :thumb:

[OllieKing]

Looks Sweet

[big gra]

splitter is on and front bumper is primed, gonna rub the skirts and pack bumper down tomorrow and get them painted.

[big gra]

had a change of mind with the wheels, going to do them gloss black, but dont know how there gonna handle a 60mm drop because the offset is wrong and there close on the front, fine on the back though!

[craig green]

Good progress Gra. Lose the wheels IMO & get some 15@ GM alloys on it. It'll go lower & have stacks more room to avoid rubbing.

Will look good when done. Engine OK & sorted now?

[Adam]

Good to see the splitter arrived all sound mate :)

[big gra]

Good progress Gra. Lose the wheels IMO & get some 15@ GM alloys on it. It'll go lower & have stacks more room to avoid rubbing.

Will look good when done. Engine OK & sorted now?

cheers craig, yea its ok, needs booking in at a garage to set the timing and fuel air mixture. think i am going to sell those wheels, just having trouble finding some more.

[big gra]

had a brain wave, just sent money off for springs and performance shocks. going to put the 60mm rear springs and shockds on the back, but take the 60mm springs off the shocks im getting and put my 40mm springs on. that way i can keep the wheels and the car will sit level!! yay

[Rexy]

was going to ask how this is comming along Gra, Spraying mine this weekend ouhhhh sooooo excited :D

And my ankle is better been out this afternoon poping some 180 rollback's woo lol.

[big gra]

was going to ask how this is comming along Gra, Spraying mine this weekend ouhhhh sooooo excited :D

And my ankle is better been out this afternoon poping some 180 rollback's woo lol.

haha laughin. ive just rubbed down and primed the bumpers, going to get some matt black paint this afternoon. hopefuly suspension should be here monday or tuesday so should be on the road next week. :)

[big gra]

got the bumpers and skirts sprayed up today, £20 worth of sandpaper, primer and matt black spray paint and they look ok. not looking forward to fitting the skirts :confused:

http://i57.photobucket.com/albums/g201/biggra/21052008081.jpg

http://i57.photobucket.com/albums/g201/biggra/21052008082.jpg

[big gra]

got the bumpers back on, gonna leave the skirts till a day were theres two of us and a descent drill. ive got all the clips, gonna go DIY and find right size screws. would look ok now if the wheels were painted.

front, love the splitter

http://i57.photobucket.com/albums/g201/biggra/21052008083.jpg

rear

http://i57.photobucket.com/albums/g201/biggra/21052008084.jpg

[big gra]

woo, just been on the maiden voyage, was vey dissopointed, pulled at my mates, adjusted the timing on the dizzy a bit and off it shot. just need the exhaust sorting, was blowing like mad, and its sorted, besides painting wheels and fitting 60mm kit.

[Rexy]

:d

[Rickyb]

loose the wheels mate other than that its lookin good

[Adam]

Nice job on the bumpers, splitter fits well :cool:

[big gra]

well all the wiring is now done besides rev counter. just need to sort exhaust tomorrow, its bangine on the exhaust tunnel. need to deside what am doing about the wheels, want to sell them but struggling to find a new set that i like with good 45 tyres on.

[ck]

looking good mate, in my opinon i would defo put the 60mm springs on the front. looks abit out of proportion with a gap between the front arch n tyre and not the back...

[big gra]

http://i57.photobucket.com/albums/g201/biggra/novas.jpg

right. just picked these alloys up tonight, not what i was hoping to find, but i like them and they have the right size tyres. going to give them a clean up, and a quick spray, and they will go on when the 60mm kit comes next week. on the look out for some 80mm rear spring so the car will sit nice and level.

(just to add, that car is now being broken by lee h, ive never seen such a bad shell in my life, looks can be decieving, haha lol )

[big gra]

wheels werent in that bad nic, but thought while there off ill give them a quick going over. here they are in primer ready for paint. :thumb:

http://i57.photobucket.com/albums/g201/biggra/23052008087.jpg

[big gra]

2 coats of satin black.

http://i57.photobucket.com/albums/g201/biggra/23052008088.jpg

[big gra]

ive got the wheels on. not gonna take a pic untill i get the 60mm kit on next week, looks horrible atm. been for a long drive today, everything seems fine, bit of a knock from the exhaust though but will sort that tomorrow.

[Ryan5cyl]

Went round to yours before Graham, seen the new weels on looks alreet, couldnt get any reception to phone you and couldnt see you around, was like ghost town, your other wheels were left out there to be swiped too :roll:

[P Whack]

gra what is ur obssesion with rattle cans?

[big gra]

Went round to yours before Graham, seen the new weels on looks alreet, couldnt get any reception to phone you and couldnt see you around, was like ghost town, your other wheels were left out there to be swiped too :roll:

ye athey look ok, but car needs lowering on its hoop. no1 is around because its chelsea flower show, everyone is there this weekend. :thumb:

[big gra]

forgot to put a pic up of the wheels done.

http://i57.photobucket.com/albums/g201/biggra/23052008089.jpg

:thumb:

[NovaLad]

Look good!

Keep it up!

[big gra]

well tomorrows jobs are skirts and exhaust. cant wait to get the lowering kit on, will look soooo much better.

[big gra]

well, today was very stresful, got the skirts on, hate doing it but i think they have come out ok. lots of drilling and pop-riveting the clips on. really the only thing left to do is fit the 60mm kit when it comes next week, its way too high atm. that should finish the body work off anyway. need to make a bracket to mount the induction kit to the AFM.

http://i57.photobucket.com/albums/g201/biggra/25052008092.jpg

http://i57.photobucket.com/albums/g201/biggra/25052008093.jpg

:thumb:

[Adam]

Will look much better when lowered :)

[big gra]

cant wait to get it lowered, will look sexual, hehe!! :)

[vaughanmc]

Looks really good mate, once its lowered it will be spot on :)

[big gra]

todays progress, taken the exhaust off, cut and welded it in 2 different places, not sits straight in the tunnel, dosent knock and dosent leak too bad now.

fitted the induction kit after a long wait for a bracket, ended up making one. need a bigger filter though.

http://i57.photobucket.com/albums/g201/biggra/26052008100.jpg

http://i57.photobucket.com/albums/g201/biggra/26052008105.jpg

[big gra]

now a 3 wheeler, have got a puncture :(

[big gra]

noo, had the dog in the car today, he tried to climb out the passenger window and had put claw marks down the passenger door, looks a state, im not happy at all!!

[big gra]

woow, got the 60mm springs and shocks on today, very happy with the fornt but want it about 80-100mm on the rear. want the tyre tucket under the arches!!

http://i57.photobucket.com/albums/g201/biggra/02062008112.jpg

http://i57.photobucket.com/albums/g201/biggra/02062008111.jpg

[craig green]

Looks fine to me Gra. Too low = broken IMO.

[big gra]

yea its not too bad, would be perfect with 80mm on the rear imo. gonna try and sort som einsurance now and take it for a blast, try and settle the suspension a bit!!

[big gra]

wahey, 2 weeks insurance cost £15, not bad seeing as im 18.

been out 4 a drive today (legally now), broken down 4 times. lost gears first time, lots expansion cap 2nd, and loose terminal on the battery 3rd. quick trip to the scrappy sorted the first 2, and tightened the battery terminal up.

few more pics:

http://i57.photobucket.com/albums/g201/biggra/02062008113.jpg

http://i57.photobucket.com/albums/g201/biggra/02062008114.jpg

http://i57.photobucket.com/albums/g201/biggra/02062008115.jpg

[Adam]

Lol, eventful first outing then.

Loooks miles better now its lowered :)

[big gra]

Lol, eventful first outing then.

Loooks miles better now its lowered :)

cheers matey. hopefully all the things that want to go wrong will happen this week, before the trip to pod.

[big gra]

eeh only 2 days left to go, and i havent even got the nova, its in the garage having timing etc set. has been at pipeworx exhaust manufacturers today having the exhaust done. had trouble free trip upto rexxys yesterday for a blast, wa svery pleased.

outside rexxys

http://i57.photobucket.com/albums/g201/biggra/04062008116.jpg

rexxys beasty

http://i57.photobucket.com/albums/g201/biggra/04062008117.jpg

at exhaust place

http://i57.photobucket.com/albums/g201/biggra/05062008118.jpg

[P Whack]

Its looking good gra cant fault it

[big gra]

cheers man. finish work at 7 on friday night, still got to fit the other side skirts, try and tidy the wiring up, try and get the concrete off the side of the car, and lower the back, all before saturday morning, not too bad though. you can see the top of the rear tyre, so to me thats not low enough!!

[big gra]

well got the car back tonight from the garage, runs as sweet as it did when it was new. anyone that has rebuilt an engine its worth getting timing and fuel air mixtures etc stuff like taht, set by a proper garage, makes so much difference!

got the last few bits done before it went dark tonight, ready for tomorrow,, ooh excited!

[big gra]

well it made it, had it cleaned on the way but the camping site didnt agree with it so decided to get it mucky and rip my splitter off, put it back on on the stand. no problems driving down, engine ran beutifly, didnt overhead once. very happy

http://i57.photobucket.com/albums/g201/biggra/mynova.jpg
pic by welsh dan

[DW-Nova]

Looks very tidy mate, well done for getting it all done so quickly! who did you manage to get insurance with for £15?

[big gra]

Looks very tidy mate, well done for getting it all done so quickly! who did you manage to get insurance with for £15?

added it onto my policy for 2 weeks, im with norwhich union. think im going to insure it permenantly though, its a lot more fun that the passat!

[Rickyb]

looks top dude glad my old engine behaved for you :thumb:

[big gra]

looks top dude glad my old engine behaved for you :thumb:

yea it was fine buddy,. didnt even overheat standing in traffic was impressed. needs a bit of fiddling with then its going on a rolling road.

[big gra]

found some more pics from the weekend.

http://i57.photobucket.com/albums/g201/biggra/mynova2.jpg

http://i57.photobucket.com/albums/g201/biggra/IMG_5328.jpg

[big gra]

now sold, found to be a cat c writeoff in 2006, so only got £600 for it, wasent impressed at all!!

but that payed for this!!

http://i57.photobucket.com/albums/g201/biggra/lanny1.jpg

let the fun begin!!

[vaughanmc]

You sold the Nova ?

[Novaload_Nick]

http://i57.photobucket.com/albums/g201/biggra/mynova.jpg


Nice veiw of my ass in the window lol

[Switch_]

is your shell mk 1 or mk 2?

[big gra]

is a mk2 shell mate.