can anyone tell me what these are for?

[conad]

iv just taken the cover off from by my intake (c20let) and iv found 2 nozzle/valve/pipe things (whatever you want to call them lol) can anyone tell me what the use of them is and whether they should be connected to anything

http://i69.photobucket.com/albums/i49/conad/DSC00305.jpg

[conad]

there should be a picture there...

[conad]

http://s69.photobucket.com/albums/i49/conad/?action=view&current=DSC00305.jpg

[burgo]

there is a picture. the one on the fuel rail needs to be connected to a vacuum/pressure take off, which i assume the other nozzle/pipe thingy might be for

[conad]

look, theres more, but ones blocked off with a blue cap

http://i69.photobucket.com/albums/i49/conad/DSC00307.jpg

[Adam]

Do you have an aftermarket fuel pressure regulator?
Because that top one is the connection to the fuel regulator for vacuum/boost, and is very important that its connected, unless another regulator is in place and sorting it.

[conad]

^^^^^ that would be it then, iv got a big fat aftermarket one lol

[conad]

what about the others though

[Adam]

They should be blanked off.

[Lee H]

Looks like the hot start valve has been completely bypassed (the thing on the left) so will have no pipe in or out so don't need to block that one off. Just needs to be left plugged in to keep ECU light off.

[yellow nova]

Looks like the hot start valve has been completely bypassed (the thing on the left) so will have no pipe in or out so don't need to block that one off. Just needs to be left plugged in to keep ECU light off.

Thats right lee its not need thats why its like that