No Wiring For Rev Counter

[ianglanister]

want to fit my 6 dial gsi clocks but when i fitted them the rev counter didnt work dont think i have the green wire. has someone got a step by step on how to make a wire for them to work? cheers ian

[andy_srt40]

its just a wire from the -V side of the coil on my t40'd gte engine

[Leeboo]

I wired up a standalone rev counter last week, there should be 4 pins on the coil, and the empty-vacant one (bottom left?) should provide signal for the rev counter. I had to wire the illumination/earth/live etc but you probabaly only need the signal. Good luck.

[Edwin]

want to fit my 6 dial gsi clocks but when i fitted them the rev counter didnt work dont think i have the green wire. has someone got a step by step on how to make a wire for them to work? cheers ian

From what year is your nova? In some models the green wire is already near the clocks. Have a look at the loom, and if your lucky it's taped in about 3inches from the connector.

[bola]

heres a useful thread matey
http://www.pngclub.com/forum/showthread.php?t=81702

[ianglanister]

cool thanks for all the replies its a 1192 j reg merit cheers again ian