spax psx adjustment info ..

[MK1-GTE]

hi ...:)

Due to a pending wheel change im hoping to soften things of a little on the gte, i believe at the moment things (Full spax psx kit) have been set almost to the firmest settings due to the offset of the current wheels fitted ..(et35)

What id like to know please is the basic way to return the settings to 0 and then a base setting others have used to then work with ??

Any help would be greatfully received :thumb:
Thanks al

[Prey]

Mine are on 0 at the back and 7 at the front right now (stripped out 1.2 carb) - there are 28 'clicks' on the adjustment. To set them to 0 just turn the adjusterss anticlockwise til they wont go anymore (dont force them tho!) - mine make a noticeable click at each point. Use a flatblade driver on the rear shocks (adjuster on bottom of body) and a small spanner or the proper adjuster if you have it on the fronts (adjuster is the top one of the two small nuts in the centre of the top of the shock - id guess if it was a spanner itd be an 8mm ish but not sure).

[MK1-GTE]

thanks very much ..:)