nova turbo kit need help!

[imnobby]

hi i am looking for a turbo kit for a nova 1.6 8v gsi engine ive looked into courtney sport but they no longer do the kits so where else can i get one from? thanks for any help!

[Edwin]

have seen a company in scandinvia! try looking in finland! saw it on a website a few weeks ago. compleet kit for 900 euros

[imnobby]

any chance of website link ive found one in germany but cant read any of it because its in german and they want ?1700 for the kit lol

[Edwin]

give me a few minutes! try to find it for you

[Edwin]

http://images.google.nl/imgres?imgurl=http://www.megagaleria.com/pictures/Pic_5783_2.jpg&imgrefurl=http://www.ocf.fi/forum/viewtopic.php%3Fp%3D885601%26sid%3Deb4bba3278c522b 2b59e935f7b2c0709&h=375&w=500&sz=71&hl=nl&start=60&um=1&tbnid=qp_O8c95zZtnjM:&tbnh=98&tbnw=130&prev=/images%3Fq%3Dc16SE%26start%3D40%26ndsp%3D20%26svnu m%3D10%26um%3D1%26hl%3Dnl%26client%3Dfirefox-a%26channel%3Ds%26rls%3Dorg.mozilla:en-GB:official%26sa%3DN

klik on the price offer link of 989 euros! the you ar pasedt throug th the company website!

[General Baxter]

mvaux has gone mate

[Edwin]

link is passing me to migweb! indeed it's mvaux! wat is his website? because link on migweb isn't working

[General Baxter]

link is passing me to migweb! indeed it's mvaux! wat is his website? because link on migweb isn't working

there is no link anymore, as hes stopped trading

[Edwin]

http://www.geracaoturbo.com.br/materias/materia09.htm

This one is nice!!

[Edwin]

http://www.estherturbo.com.br/principal.htm

Have a look at galleria! the cars are sold under the name chevy

[LaurentGSi]

maybe you should have a look on the dbilas dynamic website:thumb:

[craig green]

Any kits usually exclude intercoolers, pipework & ECU etc.

So you are merely buying a turbo & manifold with a spacer plate.

[imnobby]

maybe you should have a look on the dbilas dynamic website:thumb:

You say that with a :thumb: because they are like 4,000 lol (im not cheap but bit too pricey 4 me lol)

[imnobby]

Any kits usually exclude intercoolers, pipework & ECU etc.

So you are merely buying a turbo & manifold with a spacer plate.

so your advice is?

[craig green]

Commission a custom manifold to be made to suit the turbo charger you want to use, build up the engine with the pistons or decompression method of your choice, plumb it in (oil lines, bosst hoses etc) fit the intercooler & have it mapped with a standalone management system.

[andy_srt40]

Commission a custom manifold to be made to suit the turbo charger you want to use, build up the engine with the pistons or decompression method of your choice, plumb it in (oil lines, bosst hoses etc) fit the intercooler & have it mapped with a standalone management system.

+1

[imnobby]

sounds good to me but then again i no nothing!

[andy_srt40]

it will be expensive but the gains seen will be much better than the same money spent on a 'kit'

if you wanted to do it on the cheap then the smallblock manifolds can be adapted using a plate of some description to fit the turbo on the flnage, bit of a bodge IMO but will be very cheap and works

[imnobby]

to be honest im not into bodging stuff so looks like lots of money being spent from here on (makes me laff when i realise im only in a part time job earning ?250 a month, whilst im still at college)