PDA

View Full Version : Help 1.3 irmscher injection



bogsdolocs
19-01-08, 05:14 PM
Hi Just Purchased Injection System Of Ebay System is Compleat But Having A little Troble With Wireing Is There Anyone Who Can Help :confused:

Novasport
19-01-08, 05:28 PM
Was the loom with it? if so it just needs power and earth and that's about it.
The loom is designed for LHD car but will fit a RHD easily enough.

bogsdolocs
19-01-08, 05:50 PM
Hi Yes the loom Came with it But its been choped around abit I Have Plugs That Go To
4 injectors
throtel sensor
Coolent temp
idle valve
air flo meter

I Have located the earth which is brown I have also located the main live wich is red and I beleve that conects to the alternator but I have two wires that come out of the end of the loom at injector 4 that are black and green I dont know where they connect I also have A white and red wire that comes outof the loom next to the ecu I also have Two wiers just bello the relay One Is Black with red and the other is white with green. any help is much apesiated thanks.

mikey14sr
19-01-08, 05:55 PM
two wires that come out of the end of the loom at injector 4 that are black and green

Possibly an ignition live and tacho feed that should go to the coil?

I'll have a browse through my wiring diagrams to see if they're any help.

EDIT: checked through my wiring diagrams and the multi-point system for the 1.3 isn't there, sorry.

burgo
19-01-08, 06:04 PM
I Have located the earth which is brown - correct

I have also located the main live wich is red and I beleve that conects to the alternator - can do or connect it directly to the battery

but I have two wires that come out of the end of the loom at injector 4 that are black - ignition live

and green - rev counter output

I dont know where they connect I also have A white - cant remember :(

and red wire - id imagine another permanent live

that comes outof the loom next to the ecu I also have Two wiers just bello the relay One Is Black with red - fuel pump feed??

and the other is white with green. oil pressure or water temp maybe?? dunno

any help is much apesiated thanks.

bogsdolocs
19-01-08, 06:33 PM
sorry its white with red that comes out the loom next to the ecu

bogsdolocs
19-01-08, 06:53 PM
the thing is I wired this up as I previously explained and all that happend is the relay clicked and all the injectors opend at the same time and stayed open because this hapend I never turnd on the fuel pump thru feer of flooding the chember Im not shur wherther my ecu is nacard or I need to presurize the system.

Novasport
19-01-08, 11:02 PM
One might be a coolant temp sensor wire.
Speak to Novacabrio or Duick on here as they both have/know about the injection systems