help needed again with my gte wiring

[blacknovagsi]

Hiya, i just wondered, on the gte engine, where exactly is the oil pressure switch and what colour wire would it be? the engine is going in this saturday so hopefully it should all go ok. (famouse last words!!!!!!!!!!!!!!!)

[Clean 2.0 nova]

Just a guess but near / behind the oil filter, there will be two wires, one for the oil switch and one for the oil pressure. Blue/green and blue/yellow come to mind.

[Riggy]

colours are right , but its located at the back of the block at the bottom , near the crank pully :thumn:

[meritlover]

yes that is where the pressure transducer should be. i am starting to think that you have not got a transducer. and this is leading to your confusion. am i the one who is correct?? hmmm

please

[Stuart]

the transducer for pressure reading and switch are in the same unit iirc.

[blacknovagsi]

am i right in thinking that the transducer is the bell shaped unit that screws in behind the lower pully at the belt end of the engine? and is roughly 2 inch long.(yes i know that question sounds dodgey but it's the best way i can describe it)

[Mike]

^ correct, looks like this -

http://i80.photobucket.com/albums/j181/mikenova/TWOC%20Rebuild/113.jpg

[blacknovagsi]

thanks for the picture. yeah i got one of them kicking around

[Mike]

Nah bother chief :D