PDA

View Full Version : anyone running t40s an small block



dan23
13-01-08, 06:31 PM
what alternator belt did you use an whats the part number please ?

Paul
13-01-08, 06:34 PM
mock up the original alt belt, see how much longer it neds to be, take into motorfactors and tell them, or failing that just buy a few theyre only a few ? each

Paul

SRlew
13-01-08, 06:44 PM
will see if i have a record of what i used when i baught one for mine.

or if i can remember lol

Adam
13-01-08, 07:10 PM
A standard 1200 belt

mikey14sr
13-01-08, 07:16 PM
IIRC standard is 945mm, and For the lower posistion of the T40 bracket you should need 915mm?

Novasport
13-01-08, 08:08 PM
If you are using a Sport style setup then I can get you the correct one for ?10 plus postage. They are Gates belts so very good quality

lj
13-01-08, 09:03 PM
1200 one on mine mate, if u need a onger one pop along to halfords mate and just pick through and see what they have.

meritlover
14-01-08, 08:58 AM
i had to used a longer belt on mine and also id cut and extenderd the slotted braket to make the generator sit further back. this was to make the space for the water pipe from the head that would have gone in to the old manifold to heat it.and then go to the heater matrix.i just piped it straight thru. icannot remember the size of the belt but it was longer than the 1200 one.
thank you for your time

dan23
20-01-08, 09:29 PM
so i need 915mm belt if i m using the cally 8v alt bracket ?

greg1.4
21-01-08, 07:55 AM
you need a lowering bracket for the alternator..

a standard 1200 belt is fine..lasted me a year now and still fine.

i know other people that ran standard nova belts.

dan23
21-01-08, 08:33 PM
i using an alt lowering bracker an a cally 8v slotted bracket
my nova one is too long

mikeoxford
25-01-08, 03:08 AM
"1x ST300 Alternator Mounting Fan Belt"
http://vauxhallnovasport.com/packparts.htm

When I did my rebuild, I went to vauxhall and they translated the irmscher codes into whatever GM parts they had in stock and to use a nova sport lowering bracket it used a 1200 fan belt and also a 1200 astra accelerator cable and joint, which is handy to know as they are cheaper and less of a faff to replace (allbeing said isnt as nice a feel as an aftermarket kit).

paul james
07-08-09, 11:06 AM
If you are using a Sport style setup then I can get you the correct one for ?10 plus postage. They are Gates belts so very good quality

An old post I know, but can you still get these?

AlexW
07-08-09, 11:17 AM
It would have been a better idea to pm him, rather then get banned for bumping this thread.

Southie
07-08-09, 11:21 AM
An old post I know, but can you still get these?


Members of this forum must not:
13. Bump old threads which are no longer relevant. :roll:

paul james
07-08-09, 12:07 PM
I already did try sending a PM days ago, so :roll: to you!

And regarding irrelevant posts - did it really require two members to tell me off? you post whores! ;)