PDA

View Full Version : pics of nova with pro race 1.2s


BIGS
06-01-08, 07:43 PM
Has anyone got pics of novas with pro race 1.2's on. and any with 16s?
Iain
06-01-08, 08:25 PM
R1CH's has Pro Race 1.2s, 15" I think though

http://www.pngclub.com/forum/showthread.php?t=75890
http://i6.photobucket.com/albums/y221/ricmetcalf/DSC00027.jpg
Stuart
06-01-08, 08:50 PM
Olis "Should" be 1.2's but they maybe 16's
BIGS
06-01-08, 09:19 PM
ok thats great thanks. i know what im buying tomorrow now
R1CH
06-01-08, 09:50 PM
Aye mine are just 15's, they're spot on good tough finish on them to, can't fault them at all.
Only thing with them is that they come with a 7" rim which is a tad wide for a Nova imo, can't see it being a prob if you've got your arches rolled tho.
Cheapest place i found was Halfords !!
BIGS
06-01-08, 10:21 PM
ah cheers rich well ve found a place for 350 without tyers and 550 with toyo's. and the width is not a problem as im going wide arch
Saloony
06-01-08, 10:25 PM
These are pro race 1's in 15''

http://i20.photobucket.com/albums/b204/Keiranova/100_0499.jpg
BIGS
06-01-08, 10:28 PM
Thanks Saloony nice clear pic from the side. 100% getting them now
db_1.2
06-01-08, 10:46 PM
Ive recently been looking at them as i love the wheels, but was it problem being 7inch wide?
db_1.2
06-01-08, 10:46 PM
The alloys im on about by the way!
BIGS
06-01-08, 10:51 PM
yea they are nice but the main reason im getting them is because there light
R1CH
06-01-08, 11:02 PM
Aye they are fairly light seem quite tough as well, gave mine a few bashes and there still round !
Them having a 7" rim isn't a huge prob but you will need to fold the rear arches flat, mine are folded and are still pretty close to the tyre, they'll also be pretty close to the damper on the inside to.
db_1.2
06-01-08, 11:11 PM
What about with coilovers as ill have some at the end of this month, also what ratio tyre are you using? Are yours the 15 or 16 inch diamiter?
BIGS
06-01-08, 11:16 PM
Aye they are fairly light seem quite tough as well, gave mine a few bashes and there still round !
Them having a 7" rim isn't a huge prob but you will need to fold the rear arches flat, mine are folded and are still pretty close to the tyre, they'll also be pretty close to the damper on the inside to.

well to be honist dont think ill have any problem with the rear as the wide arch kit ill getting is 4 inches wide each side so that will be fine. and thats great there tough because its for the track car so will need to be.
R1CH
07-01-08, 06:27 PM
What about with coilovers as ill have some at the end of this month, also what ratio tyre are you using? Are yours the 15 or 16 inch diamiter?

Mine are 15's with 195 / 45's, wheels are ET45
I'm running coilovers on the rear, i'd say theres about 1.5mm gap between tyre and spring on the inside and 1.5mm between tyre and arch on the outside edge.
Fronts are fine, haven't touched the arches at all.
db_1.2
07-01-08, 07:28 PM
Mine are 15's with 195 / 45's, wheels are ET45
I'm running coilovers on the rear, i'd say theres about 1.5mm gap between tyre and spring on the inside and 1.5mm between tyre and arch on the outside edge.
Fronts are fine, haven't touched the arches at all.

Cool, cheers for that information, very handy:)