wiring up rev counter on a xe.

[let_nova]

could someone please enlighten me on this? i believe that wwires or wire goes from the coil. but not to sure. anybody help?? thanks. :wall:

[Lee]

Green wire from the coil is your rev counter feed, just join it to the green wire coming out of the clocks.

Unless you have a dispack XE, in which case you'll need the feed from the ECU, which I cant remember the pinout at present.

[let_nova]

:tard: dis pack? it has a coil going to the dizzy cap?

[Lee]

its not a dispack then :)

[let_nova]

on the side of the coil beside where the HT lead goes theres a kinda blade connector? not sure of the colour.

[Lee]

That will probably be it., Ive not seen a coil for donkeys years though lol

[let_nova]

so if thats right all as i have to do is run a wire from there to the green on the back of the clocks? only one wire?

[Lee]

Yup, just one. Before you wire it up, get a multimeter on it first to check its not a 12v output.

[let_nova]

mucho gracius

[*Dave*]

i did this for mine, under the coil is a multiplug wit a green wire , conect hat straight to the green wire on the back of the clocks.