dumpycorsa
27-12-07, 09:02 PM
Hi.I have recently broke my corsa xe. The car wasn't converted by me so the parts are listed as what i was told they were. The engine was from a 1993 calibra and it was running an f16 gear box. The hubs and shafts were from m/tec but i've re-used the hubs on my nova xe. Parts for sale are as follows-
Coil- Bosch (serial no. 0 221 600 057) with 4 pin ignition mod and h/t lead. ?10 posted.PROVISIONALLY SOLD
http://i223.photobucket.com/albums/dd90/dumpydave/th_IMG_0037.jpg (http://i223.photobucket.com/albums/dd90/dumpydave/IMG_0037.jpg)
Air flow meter (serial no. 0 280 212 015). Uses 6 pin plug. Comes with air pipe (no splits) and a green cotton induction kit. Perfect working order. ?25 posted.NOW SOLD
http://i223.photobucket.com/albums/dd90/dumpydave/th_IMG_0033.jpg (http://i223.photobucket.com/albums/dd90/dumpydave/IMG_0033.jpg)
http://i223.photobucket.com/albums/dd90/dumpydave/th_IMG_0032.jpg (http://i223.photobucket.com/albums/dd90/dumpydave/IMG_0032.jpg)
SFI box complete with rubber flexi pipe on side (no splits). Rubber seal that seals around throttle body needs replacing/repair (see first pic). ?8 posted PROVISIONALLY SOLD
http://i223.photobucket.com/albums/dd90/dumpydave/th_IMG_0040.jpg (http://i223.photobucket.com/albums/dd90/dumpydave/IMG_0040.jpg)
http://i223.photobucket.com/albums/dd90/dumpydave/th_IMG_0038.jpg (http://i223.photobucket.com/albums/dd90/dumpydave/IMG_0038.jpg)
Pair of corsa xe shafts. M/tec shafts but require the machined down m/tec hubs to fit. N/S inner c/v joint/boot needs replacing. All the others are fine. ?50 would prefer collection of these due to the weight.
http://i223.photobucket.com/albums/dd90/dumpydave/th_IMG_0035.jpg (http://i223.photobucket.com/albums/dd90/dumpydave/IMG_0035.jpg)
Universal 4 stud aluminium wheel spacers. Were 5mm thick but i've turned them down to 3mm. Ideal if you aint got alot of room to play with.?5 posted
http://i223.photobucket.com/albums/dd90/dumpydave/th_IMG_0031.jpg (http://i223.photobucket.com/albums/dd90/dumpydave/IMG_0031.jpg)
Corsa dash with rev counter and ELECTRONIC speedo. The serial no. on the back is 81 117 906 and under that it reads 90 534 403. Mileage on the clock
is 83,859. ?20 posted
http://i223.photobucket.com/albums/dd90/dumpydave/th_DASHES006.jpg (http://i223.photobucket.com/albums/dd90/dumpydave/DASHES006.jpg)
http://i223.photobucket.com/albums/dd90/dumpydave/th_DASHES004.jpg (http://i223.photobucket.com/albums/dd90/dumpydave/DASHES004.jpg)
I also have a brand new nova loon lock set. It uses a single key so no more messing around in the dark finding the right key. It consists of 1 ignition barrel, 2 door locks, 1 boot lock, a complete filler cap and 2 keys to suit. I've replied to a wanted thread regarding these but if they're not interested i'm after ?30 posted.
http://i223.photobucket.com/albums/dd90/dumpydave/th_mynova.jpg (http://i223.photobucket.com/albums/dd90/dumpydave/mynova.jpg)
I also have an f16 gear box which was removed from my corsa. I'm using an f20 now so it's surplus to requirements. Getting in the way so ?40 collected.
Also i have a standard xe manifold from this car. It doesn't have a plug hole for a lambda sensor. Probably came off of a 20xe motor. ?20 collected. i'll post pics up if required for this as i don't have them atm. The manifold is in good condition.
I dont live on this site so if you want a quick reply then feel free to text me on 07881 670 680. Cheers Dave
Coil- Bosch (serial no. 0 221 600 057) with 4 pin ignition mod and h/t lead. ?10 posted.PROVISIONALLY SOLD
http://i223.photobucket.com/albums/dd90/dumpydave/th_IMG_0037.jpg (http://i223.photobucket.com/albums/dd90/dumpydave/IMG_0037.jpg)
Air flow meter (serial no. 0 280 212 015). Uses 6 pin plug. Comes with air pipe (no splits) and a green cotton induction kit. Perfect working order. ?25 posted.NOW SOLD
http://i223.photobucket.com/albums/dd90/dumpydave/th_IMG_0033.jpg (http://i223.photobucket.com/albums/dd90/dumpydave/IMG_0033.jpg)
http://i223.photobucket.com/albums/dd90/dumpydave/th_IMG_0032.jpg (http://i223.photobucket.com/albums/dd90/dumpydave/IMG_0032.jpg)
SFI box complete with rubber flexi pipe on side (no splits). Rubber seal that seals around throttle body needs replacing/repair (see first pic). ?8 posted PROVISIONALLY SOLD
http://i223.photobucket.com/albums/dd90/dumpydave/th_IMG_0040.jpg (http://i223.photobucket.com/albums/dd90/dumpydave/IMG_0040.jpg)
http://i223.photobucket.com/albums/dd90/dumpydave/th_IMG_0038.jpg (http://i223.photobucket.com/albums/dd90/dumpydave/IMG_0038.jpg)
Pair of corsa xe shafts. M/tec shafts but require the machined down m/tec hubs to fit. N/S inner c/v joint/boot needs replacing. All the others are fine. ?50 would prefer collection of these due to the weight.
http://i223.photobucket.com/albums/dd90/dumpydave/th_IMG_0035.jpg (http://i223.photobucket.com/albums/dd90/dumpydave/IMG_0035.jpg)
Universal 4 stud aluminium wheel spacers. Were 5mm thick but i've turned them down to 3mm. Ideal if you aint got alot of room to play with.?5 posted
http://i223.photobucket.com/albums/dd90/dumpydave/th_IMG_0031.jpg (http://i223.photobucket.com/albums/dd90/dumpydave/IMG_0031.jpg)
Corsa dash with rev counter and ELECTRONIC speedo. The serial no. on the back is 81 117 906 and under that it reads 90 534 403. Mileage on the clock
is 83,859. ?20 posted
http://i223.photobucket.com/albums/dd90/dumpydave/th_DASHES006.jpg (http://i223.photobucket.com/albums/dd90/dumpydave/DASHES006.jpg)
http://i223.photobucket.com/albums/dd90/dumpydave/th_DASHES004.jpg (http://i223.photobucket.com/albums/dd90/dumpydave/DASHES004.jpg)
I also have a brand new nova loon lock set. It uses a single key so no more messing around in the dark finding the right key. It consists of 1 ignition barrel, 2 door locks, 1 boot lock, a complete filler cap and 2 keys to suit. I've replied to a wanted thread regarding these but if they're not interested i'm after ?30 posted.
http://i223.photobucket.com/albums/dd90/dumpydave/th_mynova.jpg (http://i223.photobucket.com/albums/dd90/dumpydave/mynova.jpg)
I also have an f16 gear box which was removed from my corsa. I'm using an f20 now so it's surplus to requirements. Getting in the way so ?40 collected.
Also i have a standard xe manifold from this car. It doesn't have a plug hole for a lambda sensor. Probably came off of a 20xe motor. ?20 collected. i'll post pics up if required for this as i don't have them atm. The manifold is in good condition.
I dont live on this site so if you want a quick reply then feel free to text me on 07881 670 680. Cheers Dave