Nova Bias pedal box

[MARTIN KELSON]

Hi

Bought this last week and decided last night to make a start on fitting.
The pedal box itself was straight forward but need some pics if anybody has any to where people have mounted the resevoirs.
They need to go above the master cyclinders really but the wiper motor is in the way so unless i space out the bracket 5cm to clear the wiper motor it aint going to fit.
Need some inspiration so if anybody has pictures of where people have mounted the resevoirs on a Nova that would be great.

http://i12.photobucket.com/albums/a220/NOVAMARTIN16V/NOVA%20PICS/Picture1059.jpg

http://i12.photobucket.com/albums/a220/NOVAMARTIN16V/NOVA%20PICS/Picture1060.jpg

http://i12.photobucket.com/albums/a220/NOVAMARTIN16V/NOVA%20PICS/Picture1061.jpg

http://i12.photobucket.com/albums/a220/NOVAMARTIN16V/NOVA%20PICS/Picture1062.jpg

Thanks

[Stuart]

personally I would have fitted master cylinders with integral reserviors... ok not as pretty but a damn site easier to package...

[Nick J]

Martin, would an idea be to remove the front wiper motor and replace it with a ax item? Im sure will F amongst a few others have done this when running bias pedal boxes/reservoirs etc, As Im sure you will have probably seen it bolts up directly under the wiper arm in the battery tray area which would rid you of your clearance problems etc, Nick.

[elgan]

my 2 resevoirs just go into the end threads on the cylinders.

http://img.photobucket.com/albums/v514/elg4n/NovaGLF/21062006038-small.jpg