PDA

View Full Version : WHAT DO I NEED??



simon@novaheaven
04-07-02, 10:17 AM
I wanna convert my standard central lockin system to keyless entry. what do i need to buy, where do i buy it and how much will it cost!!

Cheers

Simon

ade
04-07-02, 11:19 AM
if u have an alarm fitted with a remote arm / disarm feature (another button) and your car already has central locking fitted (via key), u should be able to rig it up to that. You'll need another solenoid to go on the drivers side tho as there isnt one (just a simple switch that powers the passenger side one). I ran the drivers side solenoid off the passenger one, so when my alarm is activated, it activates the switch on the drivers door which then pulls down the pins on the doors completing the curcuit on both doors.

Halfords and Maplin also do remote central locking devices.

Ste_Nova
04-07-02, 11:39 AM
I ran the drivers side solenoid off the passenger one, so when my alarm is activated, it activates the switch on the drivers door which then pulls down the pins on the doors completing the curcuit on both doors.
.

or fit a cav/carton/astra drivers side lock/swtich that has both bits in it