PDA

View Full Version : help/advice



moffat
15-11-07, 12:12 PM
i had an argument with my pal because when i get my nova i will lower it 60mm front
90mm back

so i need some advice.

1. what rear arch work will be needed

2.will i get up a curb with a laguna front splitter

3. where will i get the springs

and does anyone know the standard ride height of a nova

cheers craig

Jack
15-11-07, 12:15 PM
1. Depends on wheel size and width. Will probably need at least rolling though.

2. Depends on wheel/tyre size.

3. Fronts, just about everywhere does 60mm springs. Rears, try coilsprings.co.uk

peester
15-11-07, 12:38 PM
you should turret the rear suspension really,.. at -90mm, using o.e set up/pigtail springs - the rear beam may well be sitting about 3cm away from hitting the floor of the car - thats at stand still.. Make sure its a tough set of rear springs n shocks, lol...
You gonna use the car everyday??

moffat
15-11-07, 04:40 PM
i will use the car everyday and it should be running 15" or 16" wheels with a 3" back box

in an old total vauxhall issue there was a corsa lowered 60/90 using corsa stock rod springs from a corsa stock car, will they fit a nova if so i could get them i would polybush the whole lot with a gsi anti-roll bar.