PDA

View Full Version : Speedo stopped working!



Jcb
29-10-07, 07:41 PM
Just a ticking noise coming from the dash. Reads 0 the whole time but the rev counter still works fine. It has stopped counting the miles too. Cable snapped?

paddy138
29-10-07, 07:43 PM
cable snapped

General Baxter
29-10-07, 07:43 PM
cable snapped or speedo ring in the box

Jcb
29-10-07, 07:47 PM
i unplugged the cable and drove up the drive. no spinning inside it at all. if i spin the lug on the back of the speedo the needle knocks up a tiny bit then falls abck down. so i'm guessing cable. how easy is it to change it?

Mike
29-10-07, 07:47 PM
more then likely cable snapped....one of my old Nova's only drive 8miles between MOT's due to this lol ....

Jcb
29-10-07, 07:51 PM
good plan! so long as i have tomtom to give me a general reading of how fast im going... mileage right down!!!

Matt2107
29-10-07, 08:00 PM
I've got a 1.2 cable lying around i think... won't be able to get it till the weekend though.

Jcb
29-10-07, 08:04 PM
how much of a job is it to replace?

Matt2107
29-10-07, 08:06 PM
Easy peasy.

Undo the cable at the gearbox with a set of pipe grips.
Push some cable through the bulkhead so you can get the clocks out.
Remove clocks, unclip cable at the clocks. Pull through bulkhead.

If you can wait a while I will have some white dial sri clocks for sale.

Matt2107
29-10-07, 08:09 PM
Here's a pic

http://img.photobucket.com/albums/v315/Matt2107/sriwhitedials.jpg

The slight cracking at the bottom is now covered with a black plastic strip

Mike
29-10-07, 08:10 PM
good plan! so long as i have tomtom to give me a general reading of how fast im going... mileage right down!!!

2k RPM in 3rd is 30mph IIRC and 5k RPM in 5th is 70 IIRC lol

Jcb
29-10-07, 08:16 PM
found the piece in the haynes manual. i already got the cable on order mate, sorry. and again thanks for the offer but the dials won't be needed.

thanks mate

Matt2107
29-10-07, 08:17 PM
No problem