xe conversion kit??

[Nobby]

Just bought me a redtop engine with box rad, loom, ecu, fuel pump etc for ?350 chipped and a rr printout at 169 bhp but does anyone know where to get them from?? ive seen a kit on ebay for ?260 but want to shop around 1st to see what i can find or what else i can get td shafts etc?? let me know asap cheers

[russnova]

i'am doin a redtop conversion at the mo an used the m tech kit from lmf was spot on

[chris gsi]

the lmf m-tech kit is good it's been holding my engine in now for 2 years with no problems

[John]

yeah try lmf or club sponsor chris astley motorsport.

[mayhem]

i don't know the prices from the uk mtech, here in the netherlands the f*cking ripp you off.

example: adjusting 2.0 shafts is 150 euro for a set, mtech netherlands charges 500 euro for a adjusted set to buy...

[John]

http://www.chrisastleymotorsport.com/product_info.php?cPath=22&products_id=2627&osCsid=61700b1fc63658c45d73b683d7802cf0

[Philsutton]

or you could do what some round here has done an weld it straight to the chasis, I cant wait for him to fier it up an drive down the road picking bits of his car up like wing mirrors an panels that are just going ot fall off it lmfao. Dont do that.

[John]

or you could do what some round here has done an weld it straight to the chasis, I cant wait for him to fier it up an drive down the road picking bits of his car up like wing mirrors an panels that are just going ot fall off it lmfao. Dont do that.

No way phil! seriously??!! that is a picture must havelol

[Philsutton]

Its all true, its a few units down from jnc. I advised him to stiffen the mounts as he keep going through alternators like hot dinners, thing is he took it all to literally.

[scott.parker]

Its all true, its a few units down from jnc. I advised him to stiffen the mounts as he keep going through alternators like hot dinners, thing is he took it all to literally.

FPMSL! Nooob head! lol

Yeah mtech kit is the same as mine, all good from me.

Scott

[coombsey]

doesnt griffin in Brierley Hill sell them or atleast send you in the right direction

[kevo16v]

sorry to hijack the thread but was wondering if anyone else had problems with their M-tech shafts ..... this is happened to mine after having them fitted for around 2 months
http://img.photobucket.com/albums/v688/kevo16v/30102007391.jpg

http://img.photobucket.com/albums/v688/kevo16v/30102007393.jpg

[Ernie]

Thats not good

[kevo16v]

i went with the courtnay ones after that...

[Ernie]

Mine are Dars old ones so should be fine with the power im putting through them.

[Stuart]

I'd be gettign my money back on those shafts kevo.

ps where in stortford are ya :)

[kevo16v]

I tried to..... long story cut short i got them from pvd when they were still trading. Tried to get hold of them for months,even managed to get peter denis's parents phone number, still did me no good so i cut my losses. The rest of the kit was fine stillon the car now.

Unfortunatly i live on the border of the getto part of stortford, by thorley hill. Got a workshop over in spellbrook, spend most of the time there.

[mayhem]

sorry to hijack the thread but was wondering if anyone else had problems with their M-tech shafts ..... this is happened to mine after having them fitted for around 2 months
http://img.photobucket.com/albums/v688/kevo16v/30102007391.jpg

http://img.photobucket.com/albums/v688/kevo16v/30102007393.jpg

wtf??!?!?!

i've seen broken axels before from mtech, but how weird are the welded?!

you cut a axle te lenght, machine press a tube over it en weld the sides of the tube...

i don't understand why there is used such a short tube?

anyhow, here in the netherlands mtech give's a lifetime garantey tho the drive shafts, if you break one, you go back and get a new one.

(butt is still think that mtech sucks)

[scott.parker]

**** me Kevo...

Thats bad.. im not even going to say anything as i dont want to put the kibosh on it..

Scott

[kevo16v]

lol no worries mate, it happened years ago. all fixed now :thumb:

[scott.parker]

No i mean on mine lol